Overview
MUXUAN MXF-C075 Experimental Small Batch Dispersion Stirrer is an upgraded product suitable for laboratory and production use. It adopts high-performance variable frequency motor, which has the advantages of small size, large output power, stable Rotation speed, low energy consumption, low noise, etc., which improves the working environment.
Features
1. Adopt a high-performance motor for lower noise and smoother operation, ensuring the high quality of the entire machine.
2. Digital dynamic Rotation speed frequency conversion control, can be selected according to the process needs of timing, motor explosion-proof, explosion-proof machine, sound and light alarm configuration.
3. Provide manual lift and electric lift two lifting methods.
4. Mixing methods such as paddle type, tooth plate type and blade type can be selected according to the process needs, and the replacement is simple and convenient.
Principle
The device drives the Impeller through a high-performance variable frequency motor to perform high-speed swirl/spin on the material in the container to realize the dispersion, mixing, dissolve and stirring of the material. Users can choose different motor Rotation speeds (0-1500/0-3000/0-5000/0-8000 rpm) according to the material viscosity and Processing capacity, and perform precise Rotation speed control through the frequency converter.
Applications
Biology, Cosmetics, Food, Coating paints, inks, Adhesives, dyestuffs, pesticides
Steps
1. Select the appropriate Impeller form (paddle type, toothed disc type or blade type) according to the material viscosity and Processing capacity (0.5-30 L) and install it.
2. Place the material in a container of suitable size (up to 300 mm, 430 mm high).
3. Adjust the lifting mechanism manually or electrically to lower the Impeller to the appropriate working position.
4. Turn on the power supply (220/380V) and set the required Rotation speed (0-8000rpm) through the digital display frequency conversion controller.
5. Start the equipment for mixing operation, and the timing function can be selected as required.
6. After the job is completed, raise the Impeller, turn off the power, and clean it.
Notice
• Material viscosity should be ≤ 25000 cps.
Processing capacity range is 0.5-30 L.
• Make sure that the size of the container used does not exceed the allowable range of the equipment (φ 300mm, height 430mm).
• According to the process needs, explosion-proof, sound and light alarm and other safety configurations can be considered.
• Power supply voltage (220/380V) matches equipment requirements before operation.