Overview
The MUXUAN MXF-350L three-axis dispersion mixing mixer is a equipment suitable for high viscosity material handling. There are three different forms of Stirrer in the kettle, which produce strong shearing and mixing effects on the material through the combined movement of low-speed revolution and high-speed rotation. The equipment is equipped with a mountain-shaped wall scraper, which can effectively scrape off the adhesive materials on the wall and bottom of the kettle and improve the mixing uniformity. The machine has good sealing performance, supports vacuuming operation to remove bubbles, and can realize electric heating or water chilling down. The design of hydraulic lifting of the cylinder head and free movement of the cylinder block makes the operation convenient and efficient.
Features
1. The unique sealing structure can be mixed and stirred in a vacuum environment to effectively eliminate material bubbles.
2. The kettle body supports electric heating, steam heating and oil-water circulation heating, the inner coil of the jacket can be chilled down, and the process adaptability is strong.
3. Equipped with a low-speed frame Stirrer with a scraping shaft, scraping the inner wall and bottom of the kettle while stirring, the mixing effect is better.
4. Built-in two sets of high-speed dispersion shafts produce strong shearing and dispersion effects on materials, and the mixing efficiency is much higher than that of ordinary equipment.
5. The high-speed disperser adopts frequency conversion speed regulation, which can flexibly adjust the Rotation speed according to different material viscosity and process requirements.
6. The cylinder head can be hydraulically lifted, the cylinder body can be moved freely, and the operation is convenient. It can also be customized with a hydraulic extruder to facilitate the discharge of high-viscosity paste materials.
Principle
There are three Stirrers in the equipment kettle. One of the low-speed Stirrers rotates around the axis of the kettle body, and the other two high-speed stirringdevices rotate around their own axis at high speed at different Rotation speeds. This compound movement allows the material to perform complex movements in the kettle, undergoing intense shearing and mixing. At the same time, the mountain-shaped wall scraper rotates with the rotation shaft, constantly scraping off the raw materials adhered to the wall and bottom of the kettle and re-mixing them to ensure that there is no mixing dead angle. In the sealing state, the vacuum operation can be performed to remove bubbles, and the temperature control can be carried out with the heating or chilling down system.
Applications
Adhesive, sealant, mold glue, silicone sealant, organosilicone, polyurethane sealant, anaerobic glue, sealing glue, ointment, Electronic Stock, lithium ion battery slurry, gluing agent, pigment, inks, ointment paste material, grease, paints, paste cosmetics, additives and other high viscosity preparations
Steps
1. Raise the kettle cover through the hydraulic system.
2. Push the movable material cylinder to the working position or perform feeding.
3. Lower the lid and ensure sealing.
4. According to the process requirements, start low-speed stirring and high-speed dispersion, and adjust the high-speed dispersion Rotation speed through the frequency converter.
5. If heating, chilling down or venting is required, start the corresponding temperature control or vacuum system.
6. After the mixing is completed, if the material needs to be discharged, the material cylinder can be moved to the matching hydraulic extruder for extrusion.
Notice
* Equipment is High Power Industrial Equipment, Operators need to be trained.
* Check whether all components (such as sealing, hydraulic system, electrical) are normal before operation.
Rotation speed and process parameters according to material characteristics (such as viscosity).
* When vacuuming or pressurizing, be sure to ensure that the sealing is intact.
* When heating or chilling down, pay attention to temperature control to avoid overheating or overcooling affecting equipment and materials.
When moving the material cylinder and operating the hydraulic lifting mechanism, pay attention to safety and prevent pinch injuries.
* Regular maintenance of the equipment, such as checking the abrasion of the scraper, sealing status, etc.
The laboratory model is only used for small-scale experimental trial production.
