Overview
MUXUAN MXF-CD075 Experimental Chinese Small Batch Dispersion Stirrer is a laboratory and pilot equipment driven by high-performance variable frequency motors or three-phase asynchronous motors. It can choose different Rotation speeds (0-1500/3000/5000/8000 rpm) according to material viscosity and Processing capacity. It has the advantages of small size, large Power, stable Rotation speed, variable frequency speed regulation, large starting torque, high efficiency, low energy consumption, low noise and smooth operation. It improves the working environment and is an upgraded product for laboratory and small batch production.
Features
1. Adopt a high-performance motor for lower noise and smoother operation, ensuring the high quality of the entire machine.
2. Digital dynamic Rotation speed frequency conversion control, can be selected according to the process needs of timing, motor explosion-proof, explosion-proof machine, sound and light alarm configuration.
3. Provide manual lift and electric lift two lifting methods.
4. Mixing methods are diverse, including paddle type, tooth plate type, blade type, which can be selected according to the process needs, and the replacement is simple and convenient.
Principle
The device drives the stirring shaft through a high-performance motor to drive the high-speed swirl/spin of the Impeller (such as paddle type, toothed disc type or blade type) installed on the shaft end. Under the frequency conversion control, the Rotation speed can be precisely adjusted. The Impeller produces strong shearing, Impact and turbulence on the material in the container, so as to realize the dispersion, mixing, dissolving and stirring of the material. The lifting mechanism can adjust the working height of the Impeller in the container.
Applications
Biology, Cosmetics, Food, Coating paints, inks, Adhesives, dyestuffs, pesticides
Steps
1. Select the appropriate Impeller (paddle type, toothed disc type or blade type) according to the material characteristics and Processing capacity (0.5-30 L) and install it.
2. Place the material to be processed in a suitable container (container size: φ 300mm high 430mm).
3. Adjust the Impeller to the appropriate working height in the container by manual or electric lifting mechanism.
4. Turn on the power supply (220/380V) and set the required Rotation speed (0-8000rpm) through the digital display frequency conversion controller.
5. Start the equipment for dispersion and mixing operations.
6. After the job is completed, turn off the power, raise the Impeller, and clean the equipment.
Notice
• Material viscosity should be ≤ 25000 cps, Processing capacity should be within 0.5-30 L range.
• Select the appropriate Impeller form and lifting method according to the process requirements.
• Power supply voltage (220/380V) matches equipment requirements before operation.
• When the equipment is running, please pay attention to safety and avoid contact with swirl/spin parts.
• Explosion-proof, timing, sound and light alarm and other configurations can be selected according to needs to meet specific working conditions.
