Overview
The MUXUAN MXF-Z15 vacuum closed Disperser is a functional product developed on the basis of the standard hydraulic lifting high speed dissolver. The equipment is equipped with a closed vacuum cover that matches the cylinder, a milled groove in the flange and a corrosion resilience sealing ring to ensure no leakage under a closed vacuum; it can be matched with a vacuum pump or pump group, and the Vacuum Level can reach -0.9mpa (20mbar). It is suitable for dispersion stirring under special working conditions such as vacuum defoaming, vacuum feeding, and inert gas protection.
Features
1. High dispersion efficiency: Rotation speed of the equipment can reach 2930rpm (high power 1450rpm), linear speed of 20m/s or more, can quickly disperse the powder evenly into the liquid, forming a good suspension effect.
2. Vacuum closed design: The equipment has a closed barrel lid with random lifting, which can be closed with Mixing Tank to achieve Vacuum Level and avoid solvent volatilization; the barrel lid has a sight mirror and searchlight, which can observe the stirring state in real time; with a human hole, which can be used for equipment cleaning and feeding.
3. Strong non-standard: All types of non-standard products can be customized, such as explosion-proof type, closed type, with lifting cover type, coaxial/biaxial composite type, one-machine multi-cylinder type, kettle type, etc. The material can be customized according to requirements.
Principle
Through the high-speed operation of the dispersion disc, the material is in an annular flow, generating a strong vortex, which drops to the bottom of the eddy current in a spiral shape. Strong shearing impact and friction are generated between the particles, achieving the functions of rapid dispersion, dissolving, uniform mixing and emulsification. Driven by the hydraulic pump to lift the hydraulic plunger, driving the entire transmission mechanism, working group and airtight cover to lift; in the working state, the barrel cover and the cylinder are closed, matching the vacuum system to achieve the effect of vacuum dispersion.
Applications
Suitable for vacuum defoaming, vacuum feeding, inert gas protection and other special conditions of dispersion stirring.
Standards
The input voltage can be customized according to requirements such as 110V/220V/380V/415V.
Steps
1. Select the appropriate type of equipment according to the material characteristics and Processing capacity (such as 500L).
2. Close the sealing cover of the equipment with the Mixing Tank to ensure that the sealing ring is intact.
3. Connect and start the vacuum system to achieve the required Vacuum Level (e.g. -0.9MPa) in the working chamber.
4. Adjust the dispersion disc (impeller diameter 250mm) to the appropriate height through the hydraulic lifting system.
5. Start the motor (Power 15kw) and set the required Rotation speed through the speed control system (speed range 0~ 1500rpm).
6. Feed through the manhole, and observe the dispersion and mixing state of the material through the sight glass.
7. After the dispersion is completed, stop the equipment, release the vacuum, raise the barrel lid, and discharge or clean.
Notice
The above technical parameters are for reference, and the actual parameters shall prevail.
* Before the equipment runs, ensure that the sealing ring of the vacuum cover is intact to ensure airtightness.
Rotation speed and Vacuum Level are reasonably selected according to material characteristics and process requirements.
Non-standard customized products (such as explosion-proof, composite, etc.) need to specify the technical requirements in advance.
When operating, it can be observed through the sight glass, but it is necessary to pay attention to safety and avoid direct exposure to strong light or long-term gaze.
When the equipment is being lifted and operated, do not put your hands or tools into the working area.
