Overview
MUXUAN MXF-C3D Experimental Chinese Small Batch Dispersion Stirrer is a new upgrade product suitable for laboratory and production. It is driven by a high-performance variable frequency motor or a three-phase asynchronous motor. Speed range can be selected from 0-1500/3000/5000/8000 rpm. It has the advantages of small size, large Power, stable Rotation speed, low energy consumption, low noise and smooth operation, which can effectively improve the working environment.
Features
1. Adopt a high-performance motor for lower noise and smoother operation, ensuring the high quality of the entire machine.
2. Rotation speed variable frequency control using digital display, timing, motor explosion-proof, explosion-proof machine, sound and light alarm and other configurations can be selected according to process needs.
3. Provide manual lift and electric lift two lifting methods.
4. Mixing methods such as paddle type, tooth plate type and blade type can be selected according to the process needs, and the replacement is simple and convenient.
Principle
The equipment drives the stirring shaft through a high-performance motor to drive the high-speed swirl/spin of the Impeller installed at the shaft end (such as paddle type, toothed disc type or blade type). In the stirring vessel, the swirl/spin Impeller produces strong shearing, Impact and turbulence on the material, so as to achieve the process purpose of dispersing, mixing and dissolving the material. The frequency conversion Control system can precisely adjust the motor Rotation speed to adapt to the processing needs of different viscosity and process stages.
Applications
Biology, Cosmetics, Food, Coating paints, inks, Adhesives, dyestuffs, pesticides
Steps
1. According to the material characteristics (such as viscosity) and Processing capacity, select the appropriate Impeller form and install it.
2. Put the material to be processed into the mixing container (Processing capacity is recommended to be within the range of 30~ 150L).
3. Adjust the Stirrer lift height manually or electrically to allow the Impeller to immerse the material to a suitable depth.
4. Turn on the power supply (220V or 380V), and set the required Rotation speed (within the range of 0~ 1500rpm) through the digital display frequency conversion controller.
5. Start the equipment and start the mixing and dispersing operation.
6. After meeting the process requirements, stop the equipment, raise the Impeller, and remove or transfer the processed materials.
Notice
* This machine is suitable for application scenarios with material viscosity ≤ 25000 cps and Processing capacity 0.5-300 L. Please do not use it beyond the range.
* Device power is 3KW, please ensure that the Power supply voltage (220V/380V) matches and is stable.
* Lifting Travel is 600mm, please pay attention to the lifting range when operating to avoid collisions.
* According to the process requirements, you can choose to configure timing, explosion-proof or sound and light alarm functions.
* When replacing different forms of Impeller, make sure it is firmly installed.
When the equipment is running, do not put your hands or Miscellaneous foreign matter into the mixing area.
Regularly maintain the equipment to ensure smooth and safe operation.