Overview
The MUXUAN BWS-40 bar pin sand mill is a closed wet grinding equipment with continuous operation mode. The equipment is easy to operate and Reliability is good. It adopts a double-ended mechanical sealing and chilling down system, and is equipped with temperature and pressure monitoring protection to ensure stable product quality. It uses zirconia beads, which have the advantages of high grinding efficiency, good fineness, wide application range and good Abrasion Resistance.
Features
1, low energy consumption ratio, high cost performance: the use of motor pulley drive, easy to start; special disc type grinding disc structure, less power consumption.
2, easy to operate and clean: the equipment with an integrated field operation box; with a bead bucket and pulley device, easy to disassemble and clean the grinding chamber, suitable for different Colors and varieties of materials.
3, product stability: ground chamber with chilled down water jacket, with temperature and pressure monitoring and protection settings to ensure stable quality.
4, complete specifications, can be customized: provide a variety of specifications from 10L to 100L; can be customized explosion-proof or grinding cavity polyurethane lining.
Principle
The diaphragm pump pumps the material in the tank into the grinding cavity to form a circulating grinding. The ground medium with high filling rate in the cavity generates multi-directional irregular motion under the swirl/spin drive of the dial, and the material particles are crushed by the continuous collision and friction of the grinding medium. The sieve separates the material from the ground medium, and the material continuously circulates between the tank and the grinding cavity, so as to achieve the purpose of grinding with smaller particle size and narrower Particle size distribution.
Applications
Biological, cosmetics, food, Coatings, inks, colorants, dyestuffs, pesticides and other industries, suitable for latex paint, industrial paint, colorants, Water-based inks, pesticide suspensions, lithium battery Stock and other materials dispersion and grinding.
Steps
1. Pump the material in the tank into the grinding chamber through the diaphragm pump to start the equipment.
2. When the equipment is running, the grinding medium collides and rubs the material under the drive of the dial.
3. After grinding, the material is sieved and returned to the tank to form a cycle.
4. Monitor and adjust operating parameters such as temperature and pressure through on-site operation boxes.
5. After the grinding is completed, use the ball receiving bucket and pulley device to disassemble the grinding cavity for cleaning.
Notice
The viscosity of the material should be controlled below 20000cps.
• When the equipment is running, ensure that the chilled down water jacket is filled with water to maintain a good chilling down effect.
• Pay attention to monitoring the set temperature and pressure "protection values" to ensure that the equipment operates within a safe range.
• Before cleaning materials of different Colors or varieties, thoroughly clean the grinding cavity and zircon beads.
• According to the processing capacity requirements (200-600L/H) and material characteristics, select the appropriate grinding medium (0.6-1 pure zirconia).
