Overview
JFS-3000 electric lift production Disperser is a new environment-friendly laboratory product designed and developed with new technology. The product integrates stirring, sand grinding and dispersion functions. The equipment adopts a motor, which has the advantages of small size, low noise, no commutation interference, no carbon brush mechanical abrasion, environment-friendly, etc. The number directly displays the rotating shaft Rotation speed, and is equipped with a dispersion impeller and a sand grinding blade disc. It can adapt to different test needs of the laboratory, and can directly calculate the relationship between the linear velocity of the stirring, dispersion and sand grinding blades and the material viscosity and chemical reaction rate according to the displayed rotating shaft speed, providing correct data for large-scale production.
Features
1. Adopt dual-axis constant force lifting system for easy lifting.
2. Adopt a new type of frequency conversion motor, and implement stepless speed regulation for the motor through smart frequency conversion controller.
3. Application of digital PID technology, high control accuracy, 4 digital tube directly displays the spindle Rotation speed.
4. Disperse impeller and sand grinding blades are directly connected to the shaft with screws.
Principle
The device carries out stepless speed regulation of the new frequency conversion motor through the smart frequency conversion controller to drive the rotating shaft swirl/spin. Disperse impellers or sand grinding blades can be installed on the rotating shaft as needed to realize stirring, dispersing or sand grinding of materials. Digital PID technology ensures accurate Rotation speed control and is directly displayed through digital tubes.
Applications
Laboratory trials, data acquisition before large-scale production
Steps
1. According to the needs of the test, select the appropriate impeller (dispersed impeller or sand grinding disc) and connect it to the rotating shaft with screws.
2. Set the required spindle Rotation speed through the frequency conversion controller button.
3. Use the electric lifting system to adjust the impeller to the appropriate working height.
4. Start the equipment for mixing, dispersing or sanding.
5. Observe and record the spindle Rotation speed displayed by the digital tube for calculating the relevant process parameters.
Notice
• Power supply voltage is 220V 50HZ.
• Please confirm that the impeller is firmly installed before operation.
• Rotation speed and impeller are reasonably selected according to material viscosity and Processing capacity (100~ 150L).
Please pay attention to safety when using the lifting system.
• Device weight about 77KG, need to pay attention when moving.
