Overview
The Fungilab CV006-009 Capillary Viscometer is a U-tube counter-flow viscosity measurement instrument designed with Ubbelohde, conforming to BS/IP/RF standards, with a viscosity measurement range of 6000-30000cSt.
Features
1. U-tube countercurrent design, suitable for high viscosity liquid measurement
2.Comply with BS/IP/RF international standards
3. Provide accurate viscosity measurement, covering the range of 6000-30000cSt
4. Suitable for a variety of industrial fields
Principle
At a certain temperature, when the liquid flows in an upright capillary tubing in a state of complete wetting of the tube wall, its kinematic viscosity is proportional to the flow time. The measurement of the liquid with known kinematic viscosity is used as a standard, and the measurement of the time it flows out of the Capillary Viscometer, and then the measurement of the time it takes for the sample to flow out of the same Viscometer, and the viscosity of the sample is calculated.
Applications
Petroleum, chemical industry, light industry, electromechanical, national defense, transportation, coal, metallurgy, food, paper, Spinning & weaving, scientific research, institutions of higher learning
Steps
1. Use a standard liquid of known kinematic viscosity for calibrating
2. Time measurement of standard liquid from Capillary Viscometer
3. Measurement of the time for the sample to be tested to flow out of the same Viscometer
4. Measurement time based on two sample kinematic viscosity calculation
Notice
• Make sure the liquid completely wetting the capillary wall
Maintain a constant measurement temperature
• Standard liquid should be calibrated before use
• Select the appropriate Viscometer model to match the specimen viscosity range
