Overview
The bottom-of-the-kettle Mulser is a pulverized emulsification homogenizer installed at the bottom of the Reaction Kettle, which can solve the problem of bottom-of-the-kettle sediment, crush, emulsification, mixing, homogenizing, dispersing and other treatments of the material. The device can be combined with different Stirrers to achieve multi-purpose, suitable for viscosity, Temperature range, and can be customized for vacuum, explosion-proof, and pressure conditions.
Features
1. It can solve the problem of sediment at the bottom of the kettle.
2. With crushing, emulsification, mixing, homogenization, dispersion and other processing functions.
3. It can be combined with different Stirrer forms such as dispersion and stirring to achieve multi-purpose in one machine.
4. Equipment suitable for viscosity, Temperature range.
5. Can be customized for vacuum (100mbar), explosion-proof (ATEX), pressure conditions.
6. Suitable for installation at the bottom of open or closed containers, it can be cleaned intermittently during each batch of material handling.
Principle
Under the action of strong centrifugal force, the mulser at the bottom of the kettle flings the material from the radial into the narrow gap between the stator and the rotor. The material is subjected to centrifugal extrusion, impact and other forces to achieve preliminary dispersion emulsification. The outer end of the high-speed swirl/spin rotor generates high linear velocity, forming strong mechanical and hydraulic shearing, liquid layer friction, impact and tear, so that the material is fully dispersed, emulsified, homogenized, crushed, and ejected through the stator groove. The ejected material changes the flow direction under the resistance of the container wall, and at the same time forms two strong upturning turbulence under the axial suction generated by the rotor area. The material goes through several cycles to complete the process of dispersion, emulsification, homogenization, crushing, and mixing wet materials.
Applications
Dispersion, emulsification and homogenization of materials in biological, food, Coatings, inks, Spinning & weaving auxiliaries, cosmetics, lubricants, pesticides and other industries
Standards
Explosion-proof (ATEX)
Steps
1. Install the equipment at the bottom of an open or closed container.
2. According to the process requirements, it can be combined with different Stirrer forms such as dispersion and stirring.
3. Start the equipment for mixing, dispersion, emulsification, crushing, homogenization, reaction and other processes.
4. During the intermittent processing of each batch of materials, perform cleaning work.
Notice
The equipment is suitable for normal pressure, vacuum and pressure conditions.
• The equipment is suitable for dispersion, emulsification, homogenization, dissolving and suspension processes.
• The power requirements are 380V, 50/60Hz.
The contact material is usually 304/316L, and special materials need to be customized.
• Sealing forms include PTFE, skeleton sealing, and double-ended mechanical sealing.
• Applicable materials include solutions, colloids, suspensions or emulsions formed by mixing solids and liquids, liquids and liquids, such as fruit juices, soups, dairy products, tissue homogenates, cosmetics, surfactants, asphalt, emulsifying agents, oilfield chemicals, etc.
