Overview
MUXUAN ZKR-5 Vacuum homogenizer Mulser is a device suitable for cosmetic experiments and small batch production such as pastes, creams, thick sauces and honey, and is also suitable for high viscosity material industries such as food and fine chemicals. The equipment has functions such as fast homogenization, good emulsification effect, heating chill down and vacuum degassing. It has high thermal efficiency, reliable electrical control, stable operation and convenient operation and maintenance.
Features
1. The emulsification pot is an automatic lifting type, and the materials in the water pot and oil pot can be directly sucked into the emulsification pot in a vacuum state.
2, through the emulsification pot interlayer heat conducting medium heating, heating temperature can be arbitrarily set and automatically controlled.
3. The material can be chilled down by connecting cold water in the interlayer, the operation is simple and convenient, and the interlayer is equipped with a thermal insulation layer.
4. Homogeneous stirring and blade stirring can be used separately or simultaneously.
5, material particulate, emulsification, mixing, mixing, dispersion, etc. can be completed in a short time.
6. The parts in contact with the material are made of stainless steel, the inner surface is mirror polished, and the vacuum stirringdevice is clean and hygienic, in line with GMP standards.
Principle
The material is continuously generated by the scraper on the stirring frame in the homogeneous pot, and then cut, compressed and folded through the frame Stirrer and the reverse stirring blade, so that it can be mixed and flowed to the Homogenizer under the pot body. Through the shearing, Impact and turbulence generated between the rotor and the stator of the high-speed swirl/spin, the material is quickly crushed into particles of 200nm~ 2μm. In the vacuum state, the bubbles generated during the stirring process are pumped away in time. After the homogenization is completed, the material can be directly discharged by pouring or opening the pot bottom valve.
Applications
Daily chemical and cosmetic industry: skin care cream, shaving cream, shampoo, toothpaste, cold cream, sunscreen, facial cleanser, nutritional honey, detergent, shampoo, etc., industry: emulsion, emulsion, ointment (ointment), oral syrup, etc., food industry: thick sauce, cheese, oral liquid, baby food, chocolate, boiled saccharide, etc., chemical industry: emulsion, sauce, saponification products, paints, Resin, Adhesive, detergent, etc
Standards
In line with GMP standards and national standards
Steps
1. Add the aqueous and oil phase materials to the corresponding pots.
2, the material is sucked into the emulsification pot through the vacuum system.
3, set the heating temperature, start the heating system to heat the material.
4. Start the mixing system (homogeneous stirring and/or paddle stirring) for emulsification and homogenization.
5. If you need to chill down, pour cold water into the interlayer.
6, homogeneous emulsification is completed, by pouring or opening the pot valve for discharge.
Notice
• Please ensure that you are familiar with the operation process before operating the equipment.
• Material addition should be carried out within the allowable working volume of the equipment to avoid overloading.
• When heating and chilling down operation, please pay attention to temperature setting and control to avoid material overheating or chilling down unevenly.
• When the Homogenizer is running at high speed, do not touch the relevant moving parts.
• During the operation and lifting of the equipment, please ensure that there are no obstacles and personnel safety around.
• Regularly clean areas in contact with materials to maintain equipment hygiene.
• Please follow the equipment specifications during maintenance to ensure electrical safety.
