Overview
MUXUAN ZKR-50 Vacuum homogenization Mulser is a equipment suitable for laboratory and small batch production. The equipment has the functions of fast homogenization, good emulsification effect, heating chill down and vacuum degassing, which meets national standards, has high thermal efficiency, stable operation and convenient operation and maintenance. It is an ideal production equipment for cosmetics such as ointments, creams, thick sauces and honey, as well as high viscosity materials such as food and fine chemicals.
Features
1. The emulsification pot is an automatic lifting type, and the materials of the water pot and oil pot can be directly sucked into the emulsification pot in a vacuum state.
2, through the interlayer heat conducting medium heating material, heating temperature can be set arbitrarily, automatic control; interlayer cold water can chill down the material, simple operation, interlayer outer insulation layer.
3. Homogeneous stirring and blade stirring can be used separately or simultaneously.
4, material particulate, emulsification, mixing, mixing, dispersion, etc. can be completed in a short time.
5. The parts in contact with the material are made of stainless steel, and the inner surface is mirror-polished, clean and hygienic, in line with GMP standards.
Principle
The material is continuously generated into new interfaces through the scraper on the stirring frame in the homogeneous pot, and then cut, compressed, folded by the frame Stirrer and the reverse stirring blade, and mixed to flow to the Homogenizer below the pot body. Through the shearing, Impact, turbulence and other functions generated by the high-speed swirl/spin rotor and stator, the material is quickly crushed into 200nm~ 2μm particles to complete the process of emulsification, mixing and dispersion. In the vacuum state, the bubbles generated by stirring are pumped away in time. After the homogenization is completed, the lid can be raised and the material can be poured or directly discharged through the bottom valve of the pot.
Applications
Daily chemical and cosmetic industry: skin care cream, shaving cream, shampoo, toothpaste, cold cream, sunscreen, facial cleanser, nutritional honey, detergent, shampoo, etc., industry: emulsion, emulsion, ointment (ointment), oral syrup, etc., food industry: thick sauce, cheese, oral liquid, baby food, chocolate, boiled saccharide, etc., chemical industry: emulsion, sauce, saponification products, paints, Resin, Adhesive, detergent, etc
Standards
National standards, GMP standards
Steps
1. Suction the water pot and oil pot materials into the emulsification pot under vacuum through the conveyor pipeline.
2. Set the heating temperature and automatically control the heating of the material through the interlayer heat transfer medium.
3. Start homogenizing stirring and/or blading stirring to disperse, homogenize, and emulsify materials.
4. If you need to chill down, add cold water to the interlayer.
5. After homogenization, raise the lid, press the pour button to discharge the material, or open the pot bottom valve and pressure valve to discharge the material directly.
Notice
• Please familiarize yourself with the functions and Control modes before operating the equipment.
• Ensure that the parts in contact with the material are clean and comply with hygiene requirements.
• When heating and chilling down, pay attention to temperature setting and control to avoid affecting material properties.
• During vacuum operation, ensure that the system is well sealed.
• Pay attention to safety when discharging to prevent the material from splashing out.
• Regularly maintain the equipment to ensure stable operation.
