Overview
MUXUAN ZKR-250 Vacuum homogenization Mulser is a equipment suitable for laboratory and small batch production. It has the functions of fast homogenization, good emulsification effect, heating chill down and vacuum degassing, and meets national standards. The equipment has high thermal efficiency, reliable electrical control, stable operation, easy operation and maintenance. It is an ideal production equipment for cosmetics such as ointments, creams, thick sauces and honey, as well as high viscosity materials such as food and fine chemicals.
Features
1. The emulsification pot is an automatic lifting type, and the materials of the water pot and oil pot can be directly sucked into the emulsification pot in a vacuum state.
2, through the emulsification pot interlayer heat conducting medium heating material, heating temperature arbitrary setting, automatic control.
3, interlayer access to cold water can chill down the material, simple and convenient operation, interlayer with insulation layer.
4. Homogeneous stirring and blade stirring can be used separately or simultaneously.
5, material particulate, emulsification, mixing, mixing, dispersion, etc. can be completed in a short time.
6. The parts in contact with the material are made of stainless steel, and the inner surface is mirror-polished, meeting GMP standards.
Principle
The material is continuously generated by the scraper on the stirring frame in the homogeneous pot, and then cut, compressed and folded by the frame Stirrer and the reverse stirring blade, so that the material is mixed and flowed to the Homogenizer under the pot body. Through the shearing, Impact, turbulence and other actions generated between the rotor and the stator of the high-speed swirl/spin, the material is quickly crushed into particles of 200nm~ 2μm. In the vacuum state, the bubbles generated during the stirring process are pumped away in time to complete the homogeneous emulsification process.
Applications
Daily chemical and cosmetic industry: skin care cream, shaving cream, shampoo, toothpaste, cold cream, sunscreen, facial cleanser, nutritional honey, detergent, shampoo, etc., industry: emulsion, emulsion, ointment (ointment), oral syrup, etc., food industry: thick sauce, cheese, oral liquid, baby food, chocolate, boiled saccharide, etc., chemical industry: emulsion, sauce, saponification products, paints, Resin, Adhesive, detergent, etc
Standards
National standards, GMP standards
Steps
1. Suction the materials in the water pot and oil pot into the emulsification pot in a vacuum state through the conveyor pipe.
2. Set the heating temperature and heat the material through the emulsification pot interlayer heat conducting medium.
3. Start homogeneous stirring and/or paddle stirring as required.
4. The material completes the process of particulate, emulsification and mixing under the action of Homogenizer.
5. After homogenization, you can raise the lid and press the pour button to discharge the material, or open the pot bottom valve and pressure valve to discharge the material directly.
6. If you need to chill down, add cold water to the interlayer.
Notice
• Please familiarize yourself with the functional components and Control mode before operating the equipment.
• Ensure that the material suction process is carried out in a vacuum state.
• The heating temperature needs to be set reasonably according to the process requirements.
• Homogeneous stirring and blade stirring can be used according to process requirements.
• Pay attention to operation safety when discharging to avoid burns or material splashing.
When cleaning equipment, pay attention to the proper maintenance of stainless steel components in contact with materials.
• Regularly check the operating status of the equipment to ensure reliable electrical control.
