Overview
MUXUAN ZKR-850 Vacuum homogenization Mulser is an experimental and production equipment suitable for cosmetics such as ointments, creams, thick sauces and honey, as well as high viscosity materials such as food and fine chemicals. The equipment has functions such as fast homogenization, good emulsification effect, heating chill down and vacuum degassing. It has high thermal efficiency, reliable electrical control, stable operation and convenient operation and maintenance.
Features
1. The emulsification pot is an automatic lifting type, and the materials in the water pot and oil pot can be directly sucked into the emulsification pot in a vacuum state.
2, through the emulsification pot interlayer heat conducting medium heating, heating temperature can be arbitrarily set and automatically controlled.
3. The material can be chilled down by connecting cold water in the interlayer, the operation is simple and convenient, and the interlayer is equipped with a thermal insulation layer.
4. Homogeneous stirring and blade stirring can be used separately or simultaneously.
5, material particulate, emulsification, mixing, mixing, dispersion, etc. can be completed in a short time.
6. The parts in contact with the material are made of stainless steel, the inner surface is mirror polished, and the vacuum stirringdevice is clean and hygienic, in line with GMP standards.
Principle
The material is continuously generated by the scraper on the stirring frame in the homogeneous pot, and then cut, compressed and folded through the frame Stirrer and the reverse stirring blade, so that it can be mixed and flowed to the Homogenizer under the pot body. Through the shearing, Impact and turbulence generated between the rotor and the stator of the high-speed swirl/spin, the material is quickly crushed into 200nm~ 2μm particles. In the vacuum state, the bubbles generated during the stirring process are pumped away in time to complete the homogeneous emulsification process.
Applications
Daily chemical and cosmetic industry: skin care cream, shaving cream, shampoo, toothpaste, cold cream, sunscreen, facial cleanser, nutritional honey, detergent, shampoo, etc., industry: emulsion, emulsion, ointment (ointment), oral syrup, etc., food industry: thick sauce, cheese, oral liquid, baby food, chocolate, boiled saccharide, etc., chemical industry: emulsion, sauce, saponification products, paints, Resin, Adhesive, detergent, etc
Standards
Comply with GMP standards
Steps
1. Suction the materials in the water pot and oil pot into the emulsification pot in a vacuum state.
2. Set the heating temperature and heat the material through the interlayer heat transfer medium.
3. Start stirring (homogeneous stirring and/or paddle stirring) for material dispersion, homogenization, emulsification and other processes.
4, during the process, the vacuum system continues to work to remove bubbles.
5. After the process is completed, the pot body can be dumped through the hydraulic lifting device, or the pot bottom valve and pressure valve can be opened to discharge directly.
6. When you need to chill down, add cold water to the interlayer to chill down the material.
Notice
Please familiarize yourself with the functions and control components before operating the equipment.
* The process of material suction, heating, mixing and discharge must be carried out under the working conditions specified by the equipment.
Pay attention to maintain cleanliness and hygiene in contact with materials.
* For operation and maintenance, please follow the relevant safety regulations of the equipment.
