Overview
HUXI HMS-208D heating Magnetic Stirrer is specially designed for Applications with higher requirements for Processing capacity, temperature and Power. The upgraded performance is better, the function is stronger, and the application range is wider. It is suitable for stirring or heating at the same time. Stirring, viscosity is not very large liquid or solid-liquid mixture.
Features
1. Aluminum die casting ceramic coating work plate abrasion resistance, corrosion resistance, high temperature oxidation resistance
2. Wide Temperature range, the highest temperature can reach 400 ℃, the heating function is controlled separately, and the button is highlighted after the heating is turned on
3. Internal and external temperature sensor PT1000, can precisely control the temperature accuracy to +/- 0.2 ℃
4. LCD LCD screen with backlight design, real-time display of temperature, Rotation speed and running time
5. With time setting function, 0~ 99h59min can be set
6. DC brushless motor, low noise, low maintenance, smooth operation, long service life
7. Dual heating control circuit, which can continue to maintain temperature stability when one heating circuit fails
8. The knob has the function of running lock and preventing misoperation to prevent accidental change of running state
9. Pressing aluminum sealing insulation shell effectively prevents liquid and gas from entering the inside of the instrument
Principle
The Magnetic Stirrer generates a swirl/spin magnetic field by driving the magnetic rotor through a DC brushless motor, which drives the stirrer in the container to synchronize swirl/spin to achieve liquid stirring; at the same time, the working plate is heated by a heating tube, and the temperature is precisely controlled with the PT1000 temperature sensor to realize the heating stirring function.
Applications
Laboratory mixing, chemical experiments, biological experiments, pharmaceutical industry, scientific research and education
Standards
Power supply voltage 220V, Rated Frequency 50~ 60Hz
Steps
Step 1 Power on
2. Set the required temperature
3. Set stirring speed
4. Set the running time (optional)
5. Start the heating and stirring function
6. Monitor parameters on the LCD display
7. Turn off the power after use
Notice
• Only for liquids or solid-liquid mixtures where viscosity is not very large
• Operating Environment Temperature should be within 5~ 40 ℃
• environment relative humidity should not exceed 80%
• Max. Capacity of stirring 20L
• The applicable range of the stirrer is 20-80mm
• Be careful to prevent liquids and gases from entering the instrument
• Use the knob locking function to prevent misoperation
