Overview
The HUXI HX-20T thermostatic metal bath Mixer is a versatile laboratory device that integrates mixing, oscillation and incubate heating. It is capable of mixing common laboratory consumables such as microtubes, PCR plates, deep-well plates and microplates, and has the ability to heat and incubate modules with an intelligent operating concept.
Features
1. LCD liquid crystal display, man-machine friendly touch Operating interface
2. Power-off recovery function, power-off recovery can automatically resume operation according to the original setting program
3. Microprocessor control temperature, Rotation speed and time, good temperature control linearity, accurate oscillation Rotation speed, small fluctuation
4. DC brushless motor drive, long life, maintenance-free
5. Metal modules are used to protect samples from contamination
6. Metal modules can be easily replaced for easy cleaning and disinfection
7. With timing function, 0~ 100 hours to set the foster time arbitrarily
8. Adjustment of temperature deviation; built-in over-temperature protection device
9. Automatic fault detection and buzzer alarm function
10. Appearance is exquisite, blue LCD display instant parameter information, touch Operating interface
Principle
The device is driven by a brushless DC motor to realize horizontal rotation oscillation, and at the same time, a heating film is used to heat the metal module. The temperature, Rotation speed and time parameters are precisely controlled by a microprocessor, and the thermostatic mixing and incubating functions are realized.
Applications
Laboratories and scientific research institutions
Steps
1. Select and install the appropriate metal module
2. Set temperature, Rotation speed and time parameters through Touchscreen
3. Place sample consumables
4. Start the device running
5. The equipment automatically completes the mixing and incubating process according to the set procedure
Notice
• Power supply voltage matching (AC220V/120V)
• Regularly clean and disinfect metal modules
• Pay attention to the working status of the over-temperature protection device
Avoid moving or touching the device while it is running
• In case of failure, the equipment will automatically detect and alarm
