Overview
HG-30L diaphragm vacuum pump is a new type of diaphragm vacuum pump independently developed by HUXI brand. It can operate continuously in an oil-free state and has the advantages of low noise, high work efficiency and long service life. The product has stable vacuum, adjustable pressure, small size, light weight, convenient use, no oil and clean and pollution-free. It can work permanently and stably and operate continuously for 24 hours. Maintenance is simple.
Features
1. Oil-free design, clean and pollution-free
2. Low noise and high work efficiency
3. Vacuum stability, adjustable pressure
4. Small size, light weight
5. Can operate continuously for 24 hours
6. Maintenance is simple and can be operated by yourself
7. Long service life
Principle
The diaphragm vacuum pump reciprocates through the motor-driven diaphragm to realize vacuum extraction and compression functions in an oil-free state. Imported corrosion-resistant rubber diaphragm material is used to ensure stable Vacuum Level and pressure output during continuous operation.
Applications
Vacuum distillation, Reaction Kettling, Vacuum suctionfiltration, Vacuum condensing, Vacuum drying, Compression and conversion of gases
Standards
Local electricity regulations
Steps
1. Place the product on the horizontal desktop shock-proof device
2. Ensure that the ventilating port is open
3. Connect the hose of the matching size
4. Install a silencer at the air outlet
5. Check whether the voltage matches
Step 6 Connect the power supply
7. Turn on the power switch
Notice
• Can only be used for air extraction
• Do not let corrosion liquid or particulate material into the pump
• Ambient Temperature cannot exceed 55 ℃
It cannot be used at high altitudes
• The product is a precision instrument and needs to be anti-dirty and moisture-proof.
• Power must be disconnected before installation or maintenance
Avoid use in water or liquid contact environments
• Motor wiring needs to be configured according to local power regulations
• Do not touch the motor housing during use or just after use
• No lubrication required
• After use, disconnect the power supply and release the pressure in the pump body
• Regularly replace filtrating materials
