Overview
HUXI HG-30D diaphragm vacuum pump is a new type of diaphragm vacuum pump independently developed, which can operate continuously in an oil-free state. It has the characteristics of low noise, high work efficiency and long service life. The product has stable vacuum, adjustable pressure, small size, light weight, easy to use, no oil and clean and pollution-free. It can work permanently and stably and operate continuously for 24 hours. Maintenance is simple.
Features
1. Oil-free design, clean and pollution-free
2. Noise less than 50dB, quiet operation
3. Can work continuously for 24 hours
4. Small size, light weight, easy to use
5. Vacuum stability, adjustable pressure
6. Maintenance is simple and can be operated by yourself
7. Made of imported corrosion-resistant rubber diaphragm
8. The motor is equipped with an overheat protector
Principle
The diaphragm vacuum pump reciprocates through the motor driving diaphragm, realizes gas suction and compression in the oil-free state, and forms a vacuum environment. Ultimate vacuum degree can be achieved by adopting two-stage pumping structure.
Applications
Vacuum distillation, Reaction Kettling, Vacuum suctionfiltration, Vacuum condensing, Vacuum drying, Compression and conversion of gases
Standards
Local electricity regulations
Steps
1. Place the product on a horizontal desktop shock-proof device
2. Ensure that the ventilating port is open
3. Connect the hose of the matching size
4. Install a silencer at the air outlet
5. Check whether the voltage meets the label requirements
Step 6 Connect the power supply
7. Turn on the power switch
Notice
● It can only be used for air extraction, and it is forbidden to let corrosion liquids or particulate materials enter the pump
● Ambient Temperature cannot exceed 55 ℃
It cannot be used at high altitudes
● It is a precision instrument and protects the product from being dirty and damp
The power supply must be disconnected before installation or maintenance
Avoid use in environments exposed to water or Miscellaneous liquids
● Motor wiring needs to be configured according to local power regulations
Do not touch the motor shell during use to avoid burns
● Water vapor and oil pollutants need to be filtrated first
● Regular replacement of filtrated materials