Overview
HG-60DL diaphragm vacuum pump is a new type of diaphragm vacuum pump independently developed by HUXI brand. It can operate continuously in an oil-free state and has the advantages of low noise, high work efficiency and long service life. The product has stable vacuum, adjustable pressure, small size, light weight, convenient use, no oil and clean and pollution-free. It can work permanently and stably and operate continuously for 24 hours. Maintenance is simple.
Features
1. Oil-free design, clean and pollution-free
2. Low noise and high work efficiency
3. Can operate continuously for 24 hours
4. Vacuum stability, adjustable pressure
5. Small size and light weight
6. Maintenance is simple and can be operated by yourself
7. Positive and negative pressure dual-use function
Principle
The diaphragm vacuum pump reciprocates through the motor driving diaphragm to realize gas suction and discharge to form vacuum or positive pressure. Imported corrosion-resistant rubber diaphragm material is used to ensure stable operation in an oil-free state.
Applications
Vacuum distillation, Reaction Kettling, Vacuum suctionfiltration, Vacuum condensing, Vacuum drying, Compression and conversion of gases
Standards
Local electricity regulations
Steps
1. Place the product on the horizontal desktop shock-proof device
2. Ensure that the ventilating port is open
3. Connect the hose to match the air inlet.
4. Install a silencer at the air outlet
Step 5 Connect the power supply
6. Turn on the power switch
Notice
• Can only be used for air extraction
• Do not let corrosion liquid or particulate material into the pump
• Ambient Temperature cannot exceed 55 ℃
It cannot be used at high altitudes
• The product is a precision instrument and cannot be dirty or damp.
• Power must be disconnected before installation or maintenance
• Do not use in environments exposed to water or Miscellaneous liquids
• Motor wiring needs to be configured according to local power regulations
• Check whether the voltage matches the label
• Do not touch the motor housing during use or just after use
• No lubrication required
• Disconnect the power supply after use to insulate the product
• Release the pressure inside the pump
• Regularly replace filtrating materials
