Overview
The BANTE S30-NH4 is a high-performance Bluetooth ion meter designed to test ammonium Ion concentration. The device connects to an Android smartphone or tablet via Bluetooth, supports 5 point button calibrate, and can be equipped with various ion selective Electrodes. Measurement accuracy is +/- 0.5% F. S, and the range is 5 × 10 to 1 mol/L.
Features
1. High-performance Bluetooth ion meter, providing 5 Ion concentration Measuring methods.
2. Optional Ion concentration units, including ppm, mg/L, mol/L and mmol/L.
3.2 to 5 point calibrated, including 8 concentration calibrated points optional.
4. Electrode management, can store 3 Electrode slope and call calibrate data.
5. Manual temperature compensation to eliminate measurement errors caused by temperature deviation.
6. Automatic end point locking, maintaining stable readings for easy browsing and recording.
7. Timed interval readings, sending measurement data to memory or printer.
8. Limit alarm, automatic warning Measured value exceeds the set range.
9. Calibrate expiration reminder prompts the user to calibrate the meter regularly.
10. calibrate report, showing date, time, calibrate point and slope.
11. Password protection against unauthorized calibrating with settings.
12. Multi-Parameter measurement, can connect Bluetooth conductivity and dissolved oxygen meter to the device and display Measured value.
13. Reset function, automatically restore the meter to the factory default settings.
Principle
The ion meter detects the ammonium Ion concentration in a sample by ion selective Electrode, converting the electrochemistry signal into a concentration reading. Manual temperature compensation mechanism is used to eliminate the effect of Ambient Temperature changes on the measurement and ensure the accuracy of the results. Bluetooth connectivity allows the device to communicate wirelessly with Android smart devices for data transmission and remote control.
Applications
Ammonium Ion concentration measurement, water quality analysis, environment monitoring, laboratory testing
Steps
1. Turn on the meter and ensure that Bluetooth is connected to the Android smart device.
2. Select Ammonium Ion Measurement mode.
3. Perform 2 to 5 point calibrating with optional calibrating fluid.
4. Electrode ion selective immersion in the sample.
5. Set manual temperature compensation as required.
6. Start the measurement, you can choose automatic end lock or continuous mode.
7. View and record readings, and the data can be sent to memory or the printer.
Notice
• Make sure the meter is calibrated before use, and the calibrated expiration reminder function can assist management.
• Manual temperature compensation needs to be set according to the actual Ambient Temperature to avoid measurement errors.
• Electrode management function allows to store multiple Electrode data and check Electrode status regularly.
• When password protection is enabled, it prevents unauthorized operation.
• The Bluetooth transmission distance should not exceed 10 meters to ensure that the device is within the effective range.
• Power supply type specified, such as 1.2V lithium battery or AAA battery, to avoid power shortage affecting performance.
Operate in a stable environment and choose Fast, Standard or High Accuracy modes to suit different needs.
