Overview
The BANTE S50-M is a high-performance Bluetooth Conductivity Meter for Android smartphones or tablets. The meter has conductivity, TDS, salinity, resistivity and Conductivity detector ash Measurement modes with a Measurement accuracy of 0.5% F.S.
Features
1. High Performance Bluetooth Conductivity Meter with Platinum Conductivity detector Electrode
2.1 to 3 point calibrated Conductivity detector standard
3. Optional Electrode constant, temperature compensation type, temperature compensation coefficient, pure water compensation coefficient, reference temperature and TDS conversion coefficient
4. Automatic temperature compensation to ensure accurate measurement of the full range
5. Automatic end point locking, maintaining stable readings for easy browsing and recording
6. Timed interval readings, sending measurement data to memory or printer
7. Limit alarm, automatic warning Measured value exceeds the set range
8. Calibrate expiration reminder, prompting users to calibrate the meter regularly
9. Calibrate report showing date, time, calibrate point and Conductivity detector
10. Password protection against unauthorized calibrating with settings
11. Multi-Parameter measurement, can connect Bluetooth pH and dissolved oxygen meter to the device and display Measured value
12. Reset function, automatically restore the meter to the factory default settings
Principle
Platinum Conductivity detector Electrode measurement solution conductivity and automatic temperature compensation to ensure accurate measurement over the full range. Measurement mode conversion including TDS, salinity, resistivity and Conductivity detector ash is supported for data transfer via Bluetooth connection.
Applications
Water quality testing, industrial process control, laboratory analysis, environment monitoring
Steps
1. Connect the Bluetooth device and turn on the meter.
2. Select Measurement mode (conductivity /TDS/salinity/resistivity/Conductivity detector ash)
3. Perform 1 to 3 point calibrating to automatically identify the standard solution
4. Set relevant parameters (such as Electrode constant, temperature compensation coefficient, etc.)
5. Electrode immersion in the solution to be tested
6. Read and record Stable Measured values
7. Optional to send data to memory or printer
Notice
Periodically calibrate meters to ensure measurement accuracy
• Conductivity detector calibrated with specified standard solution
• Keep Electrode Clean to Avoid Pollution
• Pay attention to the battery power and replace it in time
• Operate within the effective Bluetooth transmission distance (10 meters)
• Password protection settings prevent unauthorized modification
• Follow the temperature compensation range (0~ 100 ℃) for measurement
