Overview
YH1610 color haze meter can easily realize ASTM D1003 non-compensation method, ISO 13468 compensation method, full light transmitance, haze test. Through precision concave grating and 256 pixel CMOS detector, the transmittance of the transmission sample can be accurately collected Linear dispersion, and various chroma data of the transmission sample can be accurately output. High Accuracy and repeability light transmitance, haze and chroma data measurement.
Features
1. Dual-standard ISO & ASTM to meet the testing standards of different users
2. A variety of observation Illuminants, providing a variety of Color Spaces and observation Illuminants to meet the special measurement needs under different measurement conditions
3, easy to operate, faster and more accurate measurement, large size touch screen, 256 pixel dual array CMOS image sensor, USB data output device
4. With compensation port, it meets ASTM D1003 non-compensation method and ISO 13468 compensation method, providing more accurate test results
5. Dynamic measurement, independent Illuminant detector and temperature sensor, always monitor Illuminant and environment changes to ensure reliable test data
6, easy measurement, wide sample adaptation, open measurement area, can be vertical, horizontal test, adapt to more tested samples
7. Quality management software, providing powerful haze, color, light transmitance measurement and analysis software, suitable for quality monitoring and data tabular management in various industries
Principle
Using transmission illumination mode 0/D (parallel light illumination, diffuse reflection reception), through 400~ 700nm combination LED Illuminant illumination, concave grating spectroscopy, 256 pixel dual array CMOS image sensor to collect data, to achieve transmittance of transmissive samples Linear dispersion acquisition and chroma data output.
Applications
Glass Processing, Plastic Processing, Film, Display Processing, Encasement Industry, Liquid Liquid Analysis
Standards
ASTM D1003/1044、ISO 13468、ISO 14782、GB/T 2410、JJF 1303-2011、CIE 15.2、GB/T 3978、ASTM E308、JIS K7105、JIS K7361、JIS K 7136
Steps
1. Instrument preheating correction
2. Place the sample in the measurement area
3. Measurement mode and parameters
4, start the measurement, about 1.5 seconds to complete
5. View measurement results and data output
Notice
• Temperature range from 0 to 40 ° C (32 to 104 ° F)
• Storage Temperature range -20~ 50 ° C (-4~ 122 ° F)
• Sample thickness should be less than 105mm
• Instrument preheating calibration is required before measurement
• Power supply with DC 24V, 3A Power Adapter
