Overview
The TENLIN DC-4010 Vertical Low Temperature Circulating Bath is a precision thermostatic device with a Temperature range of -40 ° C to 100 ° C and a Tank volume of 10L. It uses self-developed temperature control technology, with High Accuracy Temperature Control and multiple Safety protection functions, suitable for various experiments and tests that require stable low temperature or thermostatic environment.
Features
1. Adopt self-developed temperature control technology, equipped with High Accuracy PT100 Sensor and imported electronic components.
2. The software system can correct the error between the displayed temperature and the actual temperature to ensure accurate display.
3. Standard large-screen LCD display, Temperature Display resolution up to 0.01 ℃.
4. With over-temperature protection and alarm function, the alarm temperature can be set and the load can be automatically cut off.
5. With timing function, the total Operating Time of the equipment can be set, and the load can be automatically cut off at that time.
6. Adopt hidden chilled down coil design to increase the effective use space in the groove.
7. Intelligent Software Temperature Stability, PID can automatically adjust parameters, also supports manual adjustment.
8. Software Digital Lock Control system settings to prevent misoperation.
9. The fully enclosed Compressor is used for refrigeration, with fast cooling speed and multiple protections such as overheating and overcurrent.
10. Standard internal and external circulation function, external circulation interface for the outer diameter of 10mm round tube.
11. Support non-standard customization.
Principle
The device monitors the temperature of the medium in the Tank in real time through the High Accuracy PT100 Sensor and transmits the signal to the Control system. The Control system uses an intelligent PID algorithm to automatically adjust the working status of the heater and the fully enclosed Compressor refrigeration system according to the difference between the set temperature and the measured temperature, so as to achieve fast and accurate temperature control. Standard internal and external circulation pumps circulate the thermostatic medium to external devices to expand the Temperature range.
Applications
Chemical Synthesis, Biological Fostering, Materials Testing, Petrochemicals, Pharmaceutical Research, Measurement calibrated, Universities & colleges and research institutes
Standards
No specific compliance criteria are mentioned in the reference.
Steps
1. Add an appropriate amount of suitable medium to the Tank.
2. Power on the device.
3. Set the required target temperature, over-temperature alarm temperature and timing duration through the control panel.
4. Start the equipment and the refrigeration/heating system starts working.
5. After the temperature reaches the set value and stabilizes, the experiment or test can be started.
6. After use, turn off the device and cut off the power according to the procedures.
Notice
Please use a power supply that meets the requirements and ensure good grounding.
● When adding medium, the liquid level shall not exceed the maximum allowable scale.
● When the equipment is running, do not block the entry and exit trends to ensure good heat dissipation.
It is forbidden to operate the equipment under complete freezing of the medium in the tank or under high temperature no-load conditions.
Before moving or cleaning equipment, be sure to cut off the power supply.
Non-professional personnel should not disassemble or repair the equipment without authorization.
Optional accessories (such as liquid level protection, RS485 communication, etc.) can be configured according to actual needs to enhance functionality and safety.
