Overview
The TENLIN DC-2020 Vertical Low Temperature Circulating Bath is a thermostatic device with a Tank volume of 20L with a Temperature range of -20~ 100 ° C. It uses self-developed temperature control technology, with High Accuracy Temperature Control and a number of intelligent protection functions, suitable for experiments and tests requiring precise temperature environments.
Features
1. Adopt self-developed temperature control technology, equipped with High Accuracy PT100 Sensor and imported electronic components.
2. The software system can correct the error between the displayed temperature and the actual temperature to ensure accurate display.
3. Standard large-screen LCD display, Temperature Display resolution up to 0.01 ℃.
4. With over-temperature protection and alarm function, the alarm temperature can be set and the load can be automatically cut off.
5. With timing function, the total Operating Time of the equipment can be set, and the load can be automatically cut off at that time.
6. Adopt hidden chilled down coil design to increase the effective use space in the groove.
7. Intelligent Software Temperature Stability, PID can automatically adjust parameters, also supports manual adjustment.
8. Software Digital Lock Control system settings to prevent misoperation and ensure that the experimental data is correct.
9. The fully enclosed Compressor is used for refrigeration, with fast cooling speed and multiple protections such as overheating and overcurrent.
10. Standard internal and external circulation function, external circulation import and export for the outer diameter of 10mm round tube.
11. Support non-standard customization.
Principle
The device senses the temperature of the medium in the tank through the High Accuracy PT100 Sensor and transmits the signal to the Control system. The Control system uses an intelligent PID algorithm to automatically adjust the Power output of the heater or Compressor according to the difference between the set temperature and the measured temperature to achieve fast and accurate temperature control. At the same time, through the internal and external circulation pumps, the thermostatic medium in the tank can be exported to provide a thermostatic environment for external equipment.
Applications
Chemical synthesis, biological fostering, materials testing, Petrochemicals, pharmaceutical research, Measurement calibrating
Standards
The data did not mention specific compliance criteria.
Steps
1. Add an appropriate amount of suitable medium to the Tank.
2. Connect the device power supply.
3. Set the required target temperature, over-temperature alarm temperature and timing duration through the control panel.
4. Start the equipment and start cooling or heating.
5. After the temperature reaches the set value and stabilizes, the experimental operation can be carried out, or the external circulation pipeline can be connected.
6. After the experiment, turn off the power supply of the equipment and do a good job of cleaning and maintenance.
Notice
• Make sure to use the appropriate medium and keep the liquid level within a safe range.
Equipment should be placed on a well-ventilated and stable countertop.
• During operation, do not block the entry and exit trend of the equipment.
• When setting parameters, please confirm that it is correct, and if necessary, use the software locking function to prevent misoperation.
• If you need to run for a long time, please set the timing function reasonably.
• Regularly check and clean equipment to ensure it is in good working condition.
• Non-professionals should not disassemble or repair the equipment without authorization.
