Overview
The TENLIN DC-3030 is a vertical Low Temperature Circulating Bath with a Temperature range of -30 to 100 ° C and a Tank Volume of 30L. The device uses self-developed temperature control technology, with High Accuracy Temperature Control and Stability, suitable for various experiments and tests requiring precise thermostatic environments.
Features
1. Adopt self-developed temperature control technology, equipped with High Accuracy PT100 Sensor and imported electronic components.
2. The software system can correct the error between the displayed temperature and the actual temperature to ensure accurate display.
3. Standard large-screen LCD display, Temperature Display resolution up to 0.01 ℃.
4. With over-temperature protection and alarm function, the alarm temperature can be set and the load can be automatically cut off.
5. With timing function, the total Operating Time of the equipment can be set, and the load can be automatically cut off at that time.
6. Adopt hidden chilled down coil design to increase the effective use space in the groove.
7. Intelligent Software Temperature Stability, PID can automatically or manually adjust parameters.
8. Software digital locking function to prevent misoperation and ensure the accuracy of experimental data.
9. The fully enclosed Compressor is used for refrigeration, providing fast cooling and multiple protections.
10. Standard internal and external circulation function, external circulation interface for the outer diameter of 10mm round tube.
11. Support non-standard customization.
Principle
The device monitors the temperature of the medium in the tank through a High Accuracy PT100 temperature sensor and feeds the signal back to the Control system. The Control system uses an intelligent PID algorithm to automatically or manually adjust the Power output of the heating and cooling system (fully enclosed Compressor) for fast and accurate temperature control. At the same time, the medium flow in the tank is promoted by the internal and external circulation pumps (Flow rate 13L/min) to ensure Temperature uniformity.
Applications
Biochemistry, Petrochemicals, Medicine, Physics, Measurement, Universities & colleges, Research Institutes and other fields of thermostatic experiments, sample reactions, instrument matching, etc.
Standards
No specific compliance criteria were mentioned in the data.
Steps
The detailed operation steps are not provided in the data.
Notice
Please read the instructions carefully before use.
• Ensure equipment is placed in a smooth, well-ventilated environment.
• Select the appropriate medium according to the experimental requirements and ensure that the liquid level is within a safe range.
• Pay attention to the power requirements of the equipment and connect the ground wire correctly.
• Set the over-temperature alarm temperature to prevent accidents.
• Regularly clean and maintain equipment to keep the water inlet and outlet open.
• Non-professionals should not disassemble or modify the internal parameters of the equipment.
• Optional level protection system, RS485 Communication interface, multi-point correction function, external PT100 or bracket to meet specific needs.
