Overview
The TENLIN DC-6030 Vertical Thermostatic bath is a precision thermostatic device with a Temperature range of -60 ° C to 100 ° C, Tank volume of 30 liters, vertical design, suitable for experimental and production scenarios requiring precise low temperature or thermostatic control.
Features
1. Adopt self-developed temperature control technology, equipped with High Accuracy PT100 Sensor and imported electronic components to ensure accurate temperature control.
2. The software system has the function of temperature error correction to ensure that the display temperature is accurate, and the temperature Display resolution is as high as 0.01 ℃.
3. Standard large-screen LCD display, clear and intuitive data.
4. With over-temperature protection and alarm function, the alarm temperature can be set, and the load can be automatically cut off when the temperature is exceeded.
5. With timing function, the total Operating Time of the equipment can be set, and the load can be automatically cut off at that time.
6. Adopt hidden chilled down coil design to maximize the space in the groove.
7. Intelligent PID Control system, can automatically or manually adjust parameters, Temperature Stability.
8. Software digital locking function to prevent misoperation and ensure the accuracy of experimental data.
9. The fully enclosed Compressor is used for refrigeration, with fast cooling speed and multiple protections such as overheating and overcurrent.
10. Standard internal and external circulation function, the external circulation interface is 10mm round tube to meet the needs of multiple scenes.
11. Support non-standard customization, can be personalized configuration according to user requests.
Principle
The device monitors the medium temperature in the Tank in real time through the High Accuracy PT100 temperature sensor, and transmits the signal to the microcomputer Control system. The system automatically or manually adjusts the Power output of the heater and the fully enclosed Compressor refrigeration system through the intelligent PID algorithm to achieve precise control of the temperature in the tank. At the same time, through the inner and outer circulation pumps, the thermostatic medium in the tank can be circulated to the external device to realize the thermostatic treatment of the external sample.
Applications
Chemical synthesis, Biopharmaceuticals, Materials testing, Petrochemicals, Measurement verification, Universities, Research institutes
Steps
1. Place the device in a smooth and ventilated place and connect it to the power supply.
2. Inject an appropriate amount of thermostatic medium into the Tank.
3. Turn on the power switch and set the target temperature, over-temperature alarm temperature and timing duration through the control panel.
4. Start the equipment, the refrigeration/heating system starts to work, and the domestic circulation pump runs simultaneously.
5. Once the temperature reaches the set value and stabilizes, the experiment or sample can be started.
6. After use, turn off the power supply of the equipment and do a good job of cleaning and maintenance.
Notice
Equipment should be placed in a stable, well-ventilated environment.
● Select the appropriate thermostatic medium according to the Temperature range and ensure that the liquid level is within the safe range.
When setting the over-temperature alarm temperature, it should be set within a safe and reasonable range.
Avoid unrelated personnel from operating the equipment, and use the software lock function to prevent misoperation.
Regularly check the operating status of the equipment to ensure good heat dissipation.
When making non-standard customizations, it is necessary to communicate technical parameters and requirements with the supplier in detail in advance.