Overview
TENLIN BD-1010 High Accuracy Low Temperature Circulating Bath is a precision temperature control device with a Temperature range of -10~ 100 ° C, a Tank volume of 10L and a depth of 200mm. It uses an advanced Refrigeration and Control system designed to provide a highly stable and uniform temperature environment, suitable for a variety of experiments and tests requiring precise temperature control.
Features
1. Low Noise Air-Cooled Fully Enclosed Compressor Unit, Fast Cooling Speed and Strong Temperature Stability.
2. Control system adopts special software and self-made temperature control technology, equipped with High Accuracy Pt100 Sensor and all imported electronic components.
3, with internal and external circulation system, external circulation can establish a second thermostatic field or as an external cold source, domestic circulation to ensure that the liquid temperature in the tank is highly uniform and stable.
4, with multiple Safety protection system, including refrigeration overheating/overcurrent protection, over-temperature sound and light alarm, over-temperature automatic load cutting.
5. Equipped with a large LCD control instrument, it is easy to operate and supports P.I.D automatic search or manual adjustment.
6, Temperature correction accuracy up to 0.01 ℃, Temperature Fluctuation up to +/- 005-0.01 ℃.
Principle
The device achieves rapid cooling through an Air-Cooled fully enclosed Compressor refrigeration system. The Control system monitors the liquid temperature in the tank in real time through the High Accuracy Pt100 Sensor, and uses dedicated software and P.I.D algorithms to precisely adjust the refrigeration and Heating power to maintain the set temperature. The circulating pump drives the working medium (liquid) to flow in the tank (domestic circulation) or through external circulation (external circulation) to ensure a high degree of uniformity and stability throughout the temperature field.
Applications
Laboratory thermostatic experiments, sample thermostatic fostering, chemical reaction thermostatic control, material testing, Viscometer calibrating, refractometer matching, biopharmaceutical research and development
Steps
1. Place the device in a smooth and ventilated place and connect it to the power supply.
2. Inject an appropriate amount of suitable medium (e.g. silicone oil, water, etc.) into the Tank.
3. Turn on the power switch and set the required temperature and parameters (such as the upper and lower limits of the alarm temperature) through the large LCD control panel.
4. Choose domestic circulation or external circulation mode as needed.
5. Start the device and the system will automatically run until it reaches and stabilizes at the set temperature.
6. After use, turn off the power supply of the equipment and do a good job of cleaning and maintenance.
Notice
Equipment should be placed in a smooth, well-ventilated environment.
• The injected working medium must meet the equipment requirements, and the liquid level must be within a reasonable range.
• Set the over-temperature alarm value to ensure the safety of the experiment.
• When performing external circulation operations, ensure that the external piping connections are correct and leak-free.
• When the equipment is running, do not block the entry and exit trends to ensure normal heat dissipation.
• Regular maintenance, cleaning Tank and filtrate net.
• If there is an alarm or abnormality, it should be stopped immediately for inspection, and then used after troubleshooting.
