Overview
TENLIN GDH-1006 High Accuracy Low Temperature Circulating Bath is a precision temperature control device with a Temperature range of -10 ° C to 100 ° C. It is cooled by a low-noise Air-Cooled fully enclosed Compressor and equipped with a large LCD control instrument. It has the characteristics of strong temperature Stability and easy operation. It is suitable for various experiments and tests that require High Accuracy thermostatic environment.
Features
1. Low Noise Air-Cooled Fully Enclosed Compressor Unit, Fast Cooling Speed and Strong Temperature Stability.
2. Control system adopts special software and self-made temperature control technology, equipped with High Accuracy Pt100 Sensor and imported electronic components.
3, with internal and external circulation system, external circulation can establish a second thermostatic field or as an external cold source, domestic circulation to ensure that the liquid temperature in the tank is uniform and stable.
4. With multiple protection systems, including refrigeration overheating and overcurrent protection, over-temperature sound and light alarm and can set the upper and lower limits of over-temperature alarm and automatically cut off the load.
5. Equipped with a high-end large LCD control instrument, it is easy to operate and supports P.I.D automatic search or manual adjustment.
6, with accurate temperature correction function (up to 0.01 ℃), Temperature Fluctuation up to +/- 005-0.01 ℃.
Principle
The device reduces the temperature of the medium in the Tank through the Compressor refrigeration system. The Control system precisely adjusts the refrigeration power through the P.I.D algorithm according to the temperature signal fed back by the High Accuracy Pt100 Sensor to achieve rapid cooling and precise temperature control. The circulation system (domestic circulation or external circulation) ensures Temperature uniformity and Stability of the connection system inside or outside the Tank.
Applications
Bioengineering, Pharmaceutical Research, Chemical Analysis, Physical Experiments, Material Testing, Measurement verification
Steps
1. Place the device in a smooth and ventilated place and connect it to the power supply.
2. Inject an appropriate amount of suitable medium into the Tank.
3. Turn on the power switch and set the required temperature and parameters (e.g. P.I.D value, alarm temperature, etc.) through the large LCD control panel.
4. Start the refrigeration and circulation system, and the equipment starts working.
5. After reaching the set temperature and stabilizing, experiments or tests can be conducted.
6. After use, turn off the power supply of the equipment and do a good job of cleaning and maintenance.
Notice
• Please ensure that the equipment is placed in a smooth, well-ventilated environment for use.
• When adding media to the Tank, do not exceed Maximum capacity and ensure that the appropriate media is used.
• When the equipment is running, do not block the entry and exit trends to ensure normal heat dissipation.
• When setting the upper and lower limits of the over-temperature alarm, it should be set reasonably according to the experimental requirements to ensure safety.
• When performing external circulation operations, please ensure that the external pipeline connection is firm and there is no leakage.
• When the equipment alarms, please identify the cause and troubleshoot before using it.
Before cleaning the equipment, be sure to disconnect the power supply and avoid liquids from entering the control panel and electrical parts.
