Overview
TENLIN GDH-0510 High Accuracy Low Temperature Circulating Bath is a precision temperature control device with a Temperature range of -5 to 100 ° C. It uses a low-noise Air-Cooled fully enclosed Compressor for cooling, and is equipped with a self-developed Control system and High Accuracy Sensor, which can provide a highly uniform and stable temperature environment, suitable for various experiments and tests that require precise temperature control.
Features
1. Low Noise Air-Cooled Fully Enclosed Compressor Unit, Fast Cooling Speed and Strong Temperature Stability.
2. Equipped with self-developed special software, high-standard Pt100 Sensor and imported electronic components, accurate temperature control.
3, with internal and external circulation system. The external circulation can establish a second thermostatic field or as a cold source; domestic circulation to ensure that the liquid temperature in the tank is highly uniform and stable.
4. It has a complete protection system, including cooling overheating and overcurrent protection, over-temperature sound and light alarm, and automatic load shutting function.
5. Adopting a large liquid crystal control instrument, it is easy to operate and supports P.I.D automatic search or manual adjustment.
6, with accurate temperature correction function (up to 0.01 ℃), Temperature Fluctuation up to +/- 005-0.01 ℃.
Principle
The device reduces the temperature of the medium in the Tank through the Compressor refrigeration system. The Control system precisely adjusts the refrigeration power through the P.I.D algorithm according to the temperature signal fed back by the High Accuracy Pt100 Sensor to achieve fast and stable temperature control. The circulating pump drives the working medium to flow in the tank (domestic circulation) or inside and outside the tank (external circulation), ensuring a high uniformity of the entire temperature field.
Applications
Bioengineering, pharmaceutical research, chemical synthesis, material testing, Measurement calibrating, physical experiment
Steps
1. Inject an appropriate amount of suitable medium into the Tank.
2. Connect the device power supply.
3. Set the required temperature and alarm parameters through the large LCD control panel.
4, start the equipment, select domestic circulation or external circulation mode.
5. Equipment can be used after reaching the set temperature and stabilizing.
6. After use, turn off the power of the device.
Notice
• Please use the medium that meets the requirements and ensure that the liquid level is within a safe range.
Equipment should be placed on a well-ventilated and stable countertop.
• During operation, do not block the entry and exit trend of the equipment.
• Pay attention to the power requirements marked on the equipment and ensure good grounding.
• Set the upper and lower limits of the alarm temperature, and pay attention to the alarm prompt.
• Regularly clean the equipment to keep the heat dissipation well ventilated.
• Non-professional personnel should not disassemble or repair the equipment.
