Overview
The TENLIN DCW-1008 horizontal Low Temperature Circulating Bath is a precision temperature control device with a Temperature range of -10 ° C to 100 ° C. It is cooled by a low-noise Air-Cooled fully enclosed Compressor and equipped with a High Accuracy Control system. Temperature resolution of 0.01 ° C, Fluctuation of +/- 0.03 ° C, Tank volume of 8L, suitable for experiments and tests that require a stable and uniform temperature environment.
Features
1. Low Noise Air-Cooled Fully Enclosed Compressor Unit, Fast Cooling Speed and Strong Temperature Stability.
2. Equipped with self-developed high-standard temperature control technology, using Pt100 Sensor and imported electronic components, accurate control.
3, with internal and external circulation system, external circulation can establish a second thermostatic field or as an external cold source, domestic circulation to ensure that the liquid temperature in the tank is highly uniform and stable.
4. It has a complete protection system, including Compressor overheating, overcurrent protection, and over-temperature sound and light alarm, over-temperature automatic load cutting and other functions.
5. Adopting a large liquid crystal control instrument, it is easy to operate and supports automatic search or manual adjustment of P.I.D. parameters.
6, with accurate temperature correction function, Temperature Fluctuation up to +/- 0.2 ℃～ +/- 0.05 ℃.
Principle
The device reduces the temperature of the medium in the Tank through the Compressor refrigeration system. The Control system monitors the temperature in real time through the High Accuracy Pt100 Sensor and precisely adjusts the refrigeration power using the P.I.D algorithm to achieve fast and stable temperature control. The circulation system ensures a high uniformity of the entire temperature field by pumping the medium in the tank (domestic circulation) or inside and outside the tank (external circulation).
Applications
Bioengineering, pharmaceutical research, chemical synthesis, material testing, physical experiments
Steps
1. Place the device in a smooth and ventilated place and connect it to the power supply.
2. Inject an appropriate amount of suitable medium into the Tank.
3. Turn on the power switch and set the required temperature and alarm parameters through the large LCD control panel.
4. Choose domestic circulation or external circulation mode as needed.
5. Start the device and the system will automatically run and reach the set temperature.
6. After use, turn off the power supply of the equipment and do a good job of cleaning and maintenance.
Notice
Equipment should be placed in a smooth, well-ventilated environment.
• Please inject an appropriate amount and suitable medium as required to avoid dry burning.
• When setting the temperature, do not exceed the rated Temperature range of the device (-10 ℃~ 100 ℃).
• Pay attention to the equipment alarm prompt, it will automatically protect and cut off the load when it exceeds the temperature.
• Regular maintenance to ensure stable equipment performance.
• Non-professionals should not disassemble or repair the internal parts of the equipment.
