Overview
The TENLIN SC-10B High Accuracy Thermostatic bath is a thermostatic device with a wide Temperature range and high accuracy. Its 10L Tank Volume and advanced Refrigeration and Control system provide a stable and uniform temperature field for experiments and tests requiring precise temperature control.
Features
1. Low Noise Air-Cooled Fully Enclosed Compressor Unit, Fast Cooling Speed and Strong Temperature Stability.
2. Equipped with self-developed special software, high-standard Pt100 Sensor and imported electronic components, accurate temperature control.
3, with internal and external circulation system, external circulation can establish a second thermostatic field or as an external cold source, domestic circulation to ensure that the liquid temperature in the tank is highly uniform and stable.
4. It has a complete protection system, including cooling overheating and overcurrent protection, over-temperature sound and light alarm, and automatic load cutting function.
5. Adopt high-end large LCD control instrument, easy to operate, and support P.I.D automatic search or manual adjustment.
6. Temperature correction accuracy up to 0.01 ° C, Temperature Fluctuation up to +/- 0.01 ° C (depending on the model).
Principle
The Thermostatic bath works in conjunction with the electric heating system through the Compressor refrigeration system to achieve rapid temperature rise and decrease. The Control system monitors the liquid temperature in the tank in real time through the High Accuracy Pt100 Sensor, and uses the P.I.D algorithm to precisely adjust the cooling or Heating power. The circulation pump drives the liquid for domestic circulation, so that the temperature in the tank is highly uniform; when the external circulation is turned on, the thermostatic liquid can be exported to provide a stable temperature environment for the external experimental vessel.
Applications
Bioengineering, Pharmaceutical Research, Chemical Analysis, Physical Experiments, Measurement and Testing, Material Testing
Standards
The information does not mention
Steps
1. Place the device in a smooth and ventilated place and connect it to the power supply.
2. Inject an appropriate amount of heat transfer medium (e.g. silicone oil, water, etc.) into the Tank.
3. Turn on the power switch and set the target temperature and alarm parameters through the large LCD control panel.
4. Choose domestic circulation or external circulation mode as needed.
5. Start operation and the device will automatically adjust and control the temperature.
6. After use, turn off the power supply and properly handle the medium in the tank.
Notice
Equipment should be placed in a well-ventilated, non-corrosive gas environment.
• Before use, make sure that the liquid level in the Tank is at an appropriate height to avoid dry burning.
• Please select the appropriate heat transfer medium according to the experimental temperature requirements.
• Before moving or cleaning equipment, always turn off the power and allow it to chill down completely.
• During operation, do not block the entry and exit trend of the equipment.
• If there is an abnormal situation such as over-temperature alarm, please check and troubleshoot immediately.
• Non-professionals should not disassemble or repair the internal parts of the equipment without authorization.
