Overview
The TENLIN SC-15 High Accuracy Thermostatic bath is a precision temperature control device with a Tank volume of 15 liters with a Temperature range from Room Temperature to 100 ° C. It features an advanced Refrigeration and Control system designed to provide a stable, uniform thermostatic environment for laboratory and industrial applications.
Features
1. Low Noise Air-Cooled Fully Enclosed Compressor Unit, Fast Cooling Speed and Strong Temperature Stability.
2. Control system adopts self-developed special software and High Accuracy Pt100 Sensor, with imported electronic components, accurate temperature control.
3, with internal and external circulation system: external circulation can establish a second thermostatic field or as an external cold source; domestic circulation to ensure that the liquid temperature in the tank is highly uniform and stable.
4. Equipped with a complete protection system, including refrigeration overheating/overcurrent protection, over-temperature sound and light alarm, and automatic load shutting function.
5. Equipped with a large LCD control instrument, it is easy to operate and supports automatic search or manual adjustment of P.I.D. parameters.
6. With 0.01 ℃ High Accuracy Temperature Correction Function, Temperature Fluctuation can reach +/- 0.03 ℃.
Principle
The Thermostatic bath works in tandem with the heating system through the Compressor refrigeration system to achieve rapid lifting and temperature accurate temperature control. The core Control system monitors the liquid temperature in the tank in real time through the High Accuracy Pt100 Sensor, and uses the P.I.D algorithm to dynamically adjust the cooling or Heating power to maintain the set temperature. The circulation pump drives the liquid for domestic circulation to ensure uniform temperature in the tank; when the external circulation is turned on, the thermostatic liquid can be drawn out to provide temperature control conditions for the external experimental vessel.
Applications
Laboratory thermostatic experiment, industrial process calibrating, material performance testing, biochemical sample thermostatic, precision instrument supporting temperature control
Standards
The data did not mention specific compliance criteria.
Steps
1. Place the device in a smooth and ventilated place and connect it to the power supply.
2. Inject an appropriate amount of heat transfer medium (such as silicone oil or water) into the Tank.
3. Turn on the power switch and set the target temperature and alarm parameters through the large LCD control panel.
4. Choose domestic circulation or external circulation mode as needed.
5. Start the device, and the system will automatically operate and stabilize at the set temperature.
6. After use, turn off the power of the device and drain or retain the liquid in the tank as needed.
Notice
• Please ensure that the equipment is placed in a stable and well-ventilated environment, away from flammable and explosive materials.
• When filling the heat conducting medium, the liquid level should not exceed the maximum marking line, and ensure that the medium is compatible with the equipment material.
• Before running, check whether the Power supply voltage meets the requirements and ensure that the grounding is good.
• During the operation of the equipment, do not block the entry and exit trends to ensure normal heat dissipation.
• When the over-temperature alarm is triggered, please check and troubleshoot in time, and do not force it to run.
Before performing maintenance or cleaning, always cut off the power and wait for the equipment to completely chill down.
• When connecting an external circulating pipeline, ensure that the connection is firm and leak-free, and pay attention to the insulation of the pipeline.
