Overview
The TENLIN SC-70 High Accuracy Thermostatic bath is a thermostatic device with Air-Cooled fully enclosed Compressor refrigeration and an in-house developed Control system. With a Tank volume of 70L and a Temperature range from room temperature to 100 ° C, Temperature Fluctuation up to +/- 0.05 ° C and Temperature resolution up to 0.01 ° C, it is suitable for various experiments and tests that require a stable and uniform temperature environment.
Features
1. Low Noise Air-Cooled Fully Enclosed Compressor Unit, Fast Cooling Speed and Strong Temperature Stability.
2. Control system adopts self-developed special software and temperature control technology, equipped with High Accuracy Pt100 Sensor and imported electronic components.
3, with internal and external circulation system: external circulation can lead out the thermostatic liquid in the tank, establish a second thermostatic field or as an external cold source; domestic circulation ensures that the liquid temperature in the tank is highly uniform and stable.
4. Safety protection system: Refrigeration system has overheating and overcurrent protection; Control system can set the upper and lower limits of over-temperature alarm, with over-temperature alarm and automatic load cutting function.
5. Equipped with a high-end large LCD control instrument, it is easy to operate and supports P.I.D automatic search or manual adjustment.
6. With accurate temperature correction function, Temperature Fluctuation can reach up to +/- 0.01 ° C (depending on the model).
Principle
The Thermostatic bath achieves rapid cooling through a fully enclosed Compressor refrigeration system. The control system monitors the liquid temperature in the tank in real time through the High Accuracy Pt100 Sensor, and uses the self-developed P.I.D algorithm to precisely adjust it. By controlling the Power output of the heating or cooling elements, the temperature in the tank is stabilized at the set value. The circulation system (domestic circulation or external circulation) ensures that the heat or cold is evenly distributed in the tank or transferred to external equipment, thus achieving High Accuracy thermostatic control.
Applications
Bioengineering, pharmaceutical research, chemical analysis, physical experiments, Measurement calibrating, material testing, Petrochemicals, electronic component testing
Standards
The data did not mention specific compliance criteria.
Steps
1. Place the device in a smooth and ventilated place and connect it to the power supply.
2. Inject an appropriate amount of heat transfer medium (e.g. silicone oil, water, etc.) into the Tank.
3. Turn on the power switch and set the target temperature and over-temperature alarm parameters through the large LCD control panel.
4. Choose domestic circulation or external circulation mode as needed.
5. Start operation and the device will automatically adjust and control the temperature.
6. After use, turn off the power supply of the equipment and do a good job of cleaning and maintenance.
Notice
Equipment should be placed in a smooth, well-ventilated environment.
• Before use, make sure that a sufficient amount of suitable heat transfer medium has been injected into the Tank.
• Do not cover or block the cooling ventilator when the device is running.
• When setting the over-temperature alarm value, the upper and lower limits should be reasonably set according to the experimental requirements.
• When making external circulation connections, make sure that the external pipeline connections are firm and leak-free.
• When the equipment alarms, please check and troubleshoot it in time before using it.
• Before cleaning and maintenance, be sure to disconnect the power supply of the equipment.
