Overview
The TENLIN GX-2015 High Temperature Cycler is a thermostatic device with a Tank volume of 15L and a Temperature range of room temperature to 300 ° C. The device integrates cooling, heating and cycling functions to provide a High Accuracy and High Stability temperature environment for experiments.
Features
1. Low Noise Air-Cooled Fully Enclosed Compressor Unit, Fast Cooling Speed and Strong Temperature Stability.
2. Equipped with self-developed dedicated software control technology, High Accuracy Pt100 Sensor and imported electronic components, to achieve accurate temperature control.
3, with internal and external circulation system, external circulation can establish a second thermostatic field or as an external cold source, domestic circulation to ensure that the liquid temperature in the tank is highly uniform and stable.
4. It has a complete protection system, including cooling overheating/overcurrent protection, over-temperature sound and light alarm, and over-temperature automatic load cutting.
5. Adopting a large liquid crystal control instrument, it is easy to operate and supports automatic search or manual adjustment of P.I.D. parameters.
6, Temperature correction accuracy up to 0.01 ℃, some models Temperature Fluctuation up to +/- 0.01 ℃.
Principle
The equipment controls the temperature of the medium in the Tank through the Compressor refrigeration system and the electric heating system. The Control system precisely adjusts the refrigeration or Heating power through the P.I.D algorithm according to the temperature signal fed back by the Pt100 Sensor to achieve the set temperature. The circulating pump drives the medium to flow within the system (domestic circulation) or between external equipment (external circulation), thus transferring heat and ensuring the uniformity and Stability of the temperature in the target area.
Applications
High Accuracy thermostatic environments are required in fields such as chemical synthesis, biopharmaceuticals, materials research, Petrochemicals, Universities & colleges and research institutes and laboratories.
Standards
No specific compliance criteria were mentioned in the data.
Steps
1. Inject an appropriate amount of heat transfer medium into the Tank.
2. Connect the power supply of the device and turn on the power switch.
3. Set the required target temperature and alarm temperature upper and lower limits through the control panel.
4. Choose domestic circulation or external circulation mode as needed.
5. Start the device and the system will automatically operate to reach and maintain the set temperature.
6. After use, turn off the device according to the procedures and disconnect the power supply.
Notice
• Please ensure that the liquid level in the Tank is within a safe range before use.
• Please choose the appropriate heat transfer medium according to the temperature requirements to avoid the use of flammable and explosive liquids.
• When the equipment is running, do not block the entry and exit trends to ensure good heat dissipation.
• When making external circulation connections, make sure that the pipeline connections are firm and leak-free.
When setting the alarm temperature, it should be set within a reasonable safety range.
• When the equipment has an over-temperature alarm, please check and troubleshoot in time.
• Before cleaning and maintenance, be sure to cut off the power supply until the equipment is completely chilled down.
• Non-professionals should not disassemble or repair the internal parts of the equipment.
