Overview
The TENLIN DCW-0506L Magnetic Stirring Tank is an experimental equipment that integrates thermostatic control and magnetic stirring. It uses a low-noise Air-Cooled fully enclosed Compressor for cooling, and with the self-developed Temperature Control system and High Accuracy Sensor, it can provide a fast and stable temperature environment. The equipment has the function of internal and external circulation, which can not only ensure the uniform temperature of the liquid in the tank, but also lead the thermostatic liquid outside to establish a second thermostatic field or cool the external experimental vessel.
Features
1. Refrigeration System: Low Noise Air-Cooled Fully Enclosed Compressor Unit, Fast Cooling Speed and Strong Temperature Stability.
2. Control system: Using self-developed special software and temperature control technology, equipped with High Accuracy Pt100 Sensor and imported electronic components.
3, circulation system: with internal and external circulation function, domestic circulation makes the temperature in the tank uniform and stable, external circulation can establish a second thermostatic field or as a cold source to cool the external container.
4. Protection system: The refrigeration part has overheating and overcurrent protection; Control system has over-temperature sound and light alarm, can set the upper and lower limit over-temperature alarm temperature, and can automatically cut off the load when overheating.
5. Operating interface: Equipped with high-end large LCD control instrument, easy to operate, strong temperature Stability, support P.I.D automatic search or manual adjustment.
6. High Accuracy Temperature Control: Temperature Correction accuracy up to 0.01 ° C, Temperature Fluctuation up to +/- 0.03 ° C.
Principle
The device cools the medium in the tank through a Compressor refrigeration system. Its self-developed Temperature Control system monitors the temperature in the tank in real time through the High Accuracy Pt100 Sensor and uses the P.I.D algorithm to precisely adjust the refrigeration power to achieve the set target temperature. The built-in Magnetic Stirrer drives the magnetic stirrer in the tank to swirl/spin through the swirl/spin magnetic field to mix the liquid evenly. The circulation pump can carry the thermostatic liquid in the tank for domestic circulation to maintain uniformity, or for external circulation to extend the Temperature range.
Applications
Chemical Synthesis, Biopharmaceuticals, Materials Science, Petrochemicals, Food Testing, Environment Monitoring, Universities & colleges and research institutes
Standards
The data did not mention specific compliance criteria
Steps
The information does not provide detailed operation steps
Notice
* Please read the instructions carefully before use to ensure that the Power supply voltage is consistent with the equipment requirements.
* The equipment should be placed on a well-ventilated and stable countertop, away from heat sources and flammable materials.
The medium level in the tank should be kept within the specified range to avoid dry burning or overflow.
* During operation, do not block the entry and exit trends to ensure normal heat dissipation.
* Set the upper and lower limits of the over-temperature alarm, and regularly check whether the alarm function is normal.
When an alarm or abnormality occurs, the equipment should be shut down immediately for inspection, and it can only be used after troubleshooting.
Be sure to disconnect the power supply before cleaning the equipment to avoid liquid entering the electrical part.
Non-professionals should not disassemble or repair the equipment themselves.
