Overview
TENLIN DCW-0508L magnetic stirring tank is a thermostatic experimental equipment that integrates refrigeration, heating, magnetic stirring and circulation functions. Its Tank volume is 8L, Temperature range -5~ 100 ℃, Temperature resolution up to 0.01 ℃, Temperature Fluctuation up to +/- 0.03 ℃, suitable for experimental scenarios that require High Accuracy Temperature Control and Sample Stirring.
Features
1. Low Noise Air-Cooled Fully Enclosed Compressor Unit, Fast Cooling Speed and Strong Temperature Stability.
2. Adopt self-developed special software and temperature control technology, equipped with High Accuracy Pt100 Sensor and imported electronic components, accurate temperature control.
3, with internal and external circulation system: external circulation can establish a second thermostatic field or as a cold source to cool the external container; domestic circulation to ensure that the liquid temperature in the tank is uniform and stable.
4, with multiple Safety protection system, including refrigeration system overheating, overcurrent protection, and Control system over-temperature sound and light alarm, over-temperature automatic load cutting and other functions.
5. Equipped with a large LCD control instrument, it is easy to operate and supports automatic search or manual adjustment of P.I.D. parameters.
6, with accurate temperature correction function, Temperature Fluctuation up to +/- 0.2 ℃～ +/- 0.05 ℃ (depending on the model).
Principle
The device achieves precise control of the temperature of the liquid in the Tank through the built-in Compressor refrigeration system and electric heating system, combined with the High Accuracy temperature sensor (Pt100) and intelligent PID control algorithm. At the same time, the built-in Magnetic Stirrer drives the stirrer through the swirl/spin magnetic field, so that the liquid in the tank is evenly mixed. The circulation pump can carry out domestic circulation of the thermostatic liquid in the tank to maintain uniformity, or carry out external circulation to expand the thermostatic field.
Applications
Bioengineering, pharmaceutical research, chemical synthesis, materials science, physical experiments, quality testing
Standards
The data did not mention specific compliance criteria
Steps
1. Add an appropriate amount of medium (such as silicone oil or water) to the Tank.
2. Put the sample container that needs to be thermostatic or stirred into the Tank, or connect the external circulation line.
3. Turn on the power supply and turn on the power switch of the device.
4. Set the required target temperature, stirring Rotation speed and other parameters through the large LCD control panel.
5. Start the cooling/heating and stirring functions, and the equipment starts to work.
6. After the experiment, turn off the stirring, heating/cooling functions in turn, and finally turn off the power switch.
Notice
• Before use, please ensure that the medium liquid level in the Tank is appropriate to avoid dry burning or affecting the mixing effect.
Equipment should be placed on a well-ventilated and stable countertop, away from heat sources and flammable materials.
• When performing external circulation, please ensure that the pipeline connection is firm and there is no leakage.
Do not move or tilt the device while it is running.
Before cleaning the equipment, be sure to disconnect the power supply and avoid liquids from entering the control panel or electrical parts.
• If the equipment alarms, please check whether the set temperature is within the allowable range and whether the refrigeration system is normal according to the alarm information, and then continue to use it after troubleshooting.
