Overview
TENLIN DCW-4008L magnetic stirring tank is a thermostatic equipment that integrates refrigeration, heating, circulation and magnetic stirring functions. Temperature range is -40~ 100 ℃, Tank volume is 8L, Air-Cooled Compressor refrigeration and new special software temperature control technology are used to provide accurate and stable temperature environment for laboratories.
Features
1. Low Noise Air-Cooled Fully Enclosed Compressor Unit, Fast Cooling Speed and Strong Temperature Stability.
2. Control system adopts new dedicated software to develop self-made temperature control technology, equipped with High Accuracy Pt100 Sensor and all imported electronic components.
3, with internal and external circulation system, external circulation can establish a second thermostatic field or as a cold source, domestic circulation to ensure that the liquid temperature in the tank is uniform and stable.
4. Equipped with multiple protection systems, including refrigeration overheating/overcurrent protection, over-temperature sound and light alarm, and over-temperature automatic load cutting.
5. Equipped with a high-end large LCD control instrument, it is easy to operate and supports P.I.D automatic search or manual adjustment.
6. Temperature correction accuracy up to 0.01 ° C, Temperature Fluctuation up to +/- 0.03 ° C.
7. Integrated magnetic stirring function, Speed range is 0-1000rpm.
Principle
The equipment realizes the cooling and heating of the medium in the Tank through the Compressor refrigeration system and the electric heating system. The Control system precisely adjusts the cooling or Heating power through the P.I.D algorithm according to the temperature signal fed back by the Pt100 Sensor to achieve and maintain the set temperature. The built-in circulation pump pushes the medium to flow in the tank (domestic circulation) or through the external circulation (external circulation) to ensure uniform temperature. At the same time, the Magnetic Stirrer at the bottom drives the stirrer to swirl/spin, so that the sample is heated or chilled down more evenly.
Applications
Bioengineering, Pharmaceutical Research, Chemical Synthesis, Materials Science, Physical Experiment, Measurement and Testing
Standards
The data did not mention specific compliance criteria
Steps
1. Add an appropriate amount of medium (such as silicone oil or water) to the Tank.
2. Connect the device power supply.
3. Set the required temperature, Rotation speed and other parameters through the control panel.
4. Start the refrigeration/heating, circulation, and stirring functions.
5. After the equipment is running to the set temperature and stabilized, the experimental operation can be carried out.
6. After use, turn off the power supply of the equipment and maintain it properly.
Notice
• Power supply voltage specified by the device and ensure good grounding.
• When adding medium, the liquid level should be within the range of Tank volume to avoid overfilling.
• During the operation of the equipment, do not block the entry and exit trends to ensure good heat dissipation.
• When setting the temperature, do not exceed the rated Temperature range of the device (-40~ 100 ℃).
• If you need to use the external circulation function, please ensure that the external connection pipeline is open and well sealed.
• When the equipment alarms, please check and troubleshoot according to the prompt information (such as overtemperature) before using it.
• Regularly clean the surface and Tank of the equipment to keep the ventilated port free of dust blockage.
• Non-professionals should not disassemble or repair the internal parts of the equipment.
