Overview
The TENLIN DCW-1015L magnetic stirring tank is a thermostatic and stirring experimental equipment. It uses Air-Cooled Compressor cooling, Temperature range is -10~ 100 ℃, Tank volume is 15L, with internal and external circulation system, can be used to establish a stable temperature field and sample stirring.
Features
1. Low Noise Air-Cooled Fully Enclosed Compressor Unit, Fast Cooling Speed and Strong Temperature Stability.
2. Temperature Control system composed of self-developed special software and high-standard Pt100 components.
3, with internal and external circulation system, external circulation can establish a second thermostatic field or as a cold source, domestic circulation makes the temperature in the tank uniform and stable.
4. Equipped with multiple protection systems, including cooling overheating, overcurrent protection, as well as over-temperature alarm and automatic load cutting function.
5. Adopting a large liquid crystal control instrument, it is easy to operate and supports P.I.D automatic search or manual adjustment.
6. Temperature correction accuracy up to 0.01 ° C, Temperature Fluctuation up to +/- 0.03 ° C.
7. Integrated magnetic stirring function, Speed range is 0-1000rpm.
Principle
The equipment realizes the temperature rise and fall control through the Compressor refrigeration system and the electric heating system. It is precisely adjusted by the High Accuracy Pt100 temperature sensor and the microprocessor Control system to reach the set temperature. The built-in Magnetic Stirrer drives the stirrer through the swirl/spin magnetic field, so that the liquid in the tank is evenly mixed. The circulation pump can realize the domestic circulation of the liquid in the tank, so that the temperature is uniform, or the thermostatic liquid is drawn out through the external circulation interface for temperature control of external equipment.
Applications
Chemical Synthesis, Biopharmaceuticals, Materials Science, Petrochemicals, Food Testing, Environment Monitoring, Universities & colleges and research institutes
Standards
The information does not mention
Steps
1. Add an appropriate amount of heat transfer medium (such as silicone oil or water) to the Tank.
2. Connect the device to the power supply.
3. Set the required target temperature and stirring Rotation speed through the control panel.
4. Start the cooling or heating function and stirring function.
5. When the temperature reaches the set value and stabilizes, the experimental operation can be carried out.
6. If external circulation is required, connect the external pipeline and start the circulation pump.
7. After use, turn off the power and clean the equipment.
Notice
Make sure the equipment is used in a well-ventilated environment.
• The liquid level of the heat conducting medium added should be appropriate and should not be too full.
• Power supply voltage check before use.
• When the equipment is running, do not touch the heat transfer medium in the Tank and the swirl/spin stirrer.
• When setting the temperature, do not exceed the rated Temperature range of the device (-10~ 100 ℃).
• If the device alarms, please check and troubleshoot according to the alarm information before using it.
• Regularly clean the surface and Tank of the equipment to keep the equipment drying.
Before moving or repairing equipment, be sure to disconnect the power supply.
