Overview
TENLIN DC-4010C Programmed Temperature Control Low Temperature Circulating Bath is a temperature control device with a Temperature range of -40~ 100 ° C and a Tank volume of 10L. The device uses programmed temperature control technology to provide a stable and uniform low temperature thermostatic environment.
Features
1. Low Noise Air-Cooled Fully Enclosed Compressor Unit, Fast Cooling Speed and Strong Temperature Stability.
2. Adopt self-developed dedicated software temperature control technology, equipped with High Accuracy Pt100 Sensor and imported electronic components.
3, with internal and external circulation system, external circulation can establish a second thermostatic field or as an external cold source, domestic circulation to ensure that the liquid temperature in the tank is uniform and stable.
4, with multiple protection systems, including Compressor overheating and overcurrent protection, as well as over-temperature sound and light alarm and automatically cut off the load function.
5. Equipped with a large LCD control instrument, it is easy to operate and supports automatic search or manual adjustment of P.I.D. parameters.
6. With accurate temperature correction function, Temperature Fluctuation can reach +/- 0.05 ℃.
Principle
The equipment works together through the Compressor refrigeration system and the electric heating system to realize the temperature rise and fall control. The Control system precisely adjusts the refrigeration or Heating power through the P.I.D algorithm according to the set temperature and the actual temperature fed back by the Pt100 Sensor. The circulating pump drives the working medium to flow in the tank (domestic circulation) or inside and outside the tank (external circulation) to ensure the uniformity and Stability of the temperature field.
Applications
The product can be used in laboratory research, industrial production process, product mass detection and other fields that require precise temperature control, as a thermostatic source or a cold source.
Standards
The data did not mention specific compliance criteria.
Steps
1. Place the device in a smooth and ventilated place and connect it to the power supply.
2. Inject an appropriate amount of suitable medium into the Tank.
3. Turn on the power switch and set the target temperature and program (if necessary) through the large LCD control panel.
4. Choose domestic circulation or external circulation mode as needed.
5. Start the device and the system will automatically operate to reach and maintain the set temperature.
6. After use, shut down the equipment according to the procedures and maintain it properly.
Notice
* Equipment should be placed in a well-ventilated, non-corrosive gas environment.
* Please ensure that the medium level in the Tank is appropriate before use.
* Do not cover the ventilating port or block the circulation line when the equipment is running.
* When setting the temperature, please be careful not to exceed the rated Temperature range of the device.
* The equipment has over-temperature alarm function, please check and troubleshoot in time when alarming.
* Regularly maintain the equipment to ensure its stable performance.
Non-professional personnel should not disassemble or repair the equipment without authorization.
