Overview
QIWEI FS-400D/2.5L Disperser (digital display high speed) adopts electronic constant force speed regulation circuit, digital display, high efficiency, good mixing effect, easy cleaning, simple and convenient manual lifting. The Disperser integrates dispersion function and stirring function. The two processes of dispersion and homogenization are completed by one machine and one container, and the motor Power is 400W.
Features
1. Adopt electronic constant force speed control line, digital direct display of shaft Rotation speed
2. Integrating the dispersion function and mixing function, one machine completes the two processes of dispersion and homogenization
3. High efficiency, good mixing effect, easy to clean
4. Manual lifting is simple and convenient
5. Equipped with dispersed impeller and sand disc to adapt to different test needs
6. The relationship between the linear velocity of the stirring, dispersing, and sanding disc and the material viscosity and chemical reaction rate can be calculated according to the speed of the rotating shaft
Principle
The FS-400D Disperser adopts an electronic constant force speed control circuit, and the digital direct display of the rotating shaft Rotation speed. The dispersion head generates a swirl/spin tangential high linear speed under the high-speed drive of the motor. The material produces strong hydraulic shearing and high-frequency mechanical effects under the action of huge centrifugal force, so that the fluid material can withstand thousands of shearing and high-frequency mechanical effects per minute, so as to achieve the effect of efficient mixing, dispersion and homogenization.
Applications
Factories, Research Institutions, Universities & colleges, Medical Units
Steps
1. Install the Disperser and connect the power supply
2. Choose dispersion impeller or sand disc as needed
3. Put the material into the pull cylinder
4. Adjust the height of the dispersion head by manual lifting
5. Set the desired Rotation speed and start the device
6. Observe the digital display Rotation speed and adjust it
7. Turn off the power and clean the equipment after the dispersion is completed
Notice
• Please check whether all parts of the equipment are in good condition before use
• Please pay attention to safety during operation and avoid contact with high-speed swirling/spinning parts
• Speed range according to material viscosity
• Regularly clean equipment to maintain hygiene
• Do not exceed the maximum processing viscosity and processing capacity of the equipment
• Cut off the power supply in time after use
