Overview
QIWEI FS-1100T/2.5L Disperser (Digital Display High Speed) is a laboratory equipment that integrates dispersion and stirring functions, with a motor Power of 1.1KW. The equipment can complete the dispersion and homogenization processes in the same machine and container, and has the characteristics of high efficiency, good mixing effect, easy cleaning and simple and convenient manual lifting. Widely used in factories, scientific research institutions, Universities & colleges and medical units, etc., for the dispersion and mixing of materials in liquids.
Features
1. Integrating dispersion and stirring functions, one machine and one container complete the dispersion and homogenization process.
2. Adopt digital display high-speed design, electronic constant force speed regulation, digital direct display Rotation speed.
3. Manual lifting operation is simple and convenient, using cylindrical struts, directly pressing to control the height.
4. Equipped with dispersed impellers and sand discs to adapt to different experimental needs.
5. High mixing efficiency, good effect, and easy to clean.
Principle
The Disperser adopts an electronic constant force speed regulation circuit, and the digital direct display of the rotating shaft Rotation speed. Its dispersion head generates a swirl/spin tangential high linear speed under the high-speed drive of the motor, so that the material can withstand strong hydraulic shearing and high-frequency mechanical effects under the action of huge centrifugal force. Fluid materials withstand thousands of shearing and high-frequency mechanical effects per minute, so as to achieve the effect of efficient mixing, dispersion and homogenization. Users can provide correct process data for large-scale production according to the relationship between the displayed Rotation speed and material viscosity and chemical reaction rate.
Applications
Factories, Research Institutions, Universities & colleges, Medical Units
Steps
1. Installation: Fix the two grippers on the frame, fix the stainless steel barrel, and make the barrel cover hole fit with the motor shaft; connect the five-core aviation plug of the motor and the governor (pay attention to the notch direction); connect the ground wire.
2. Preparation: Fix the selected sand disc or dispersed impeller with the rotating shaft; adjust the height position of the rotating shaft and the container, lock the motor seat and the container, put in the material and cover the container.
3. Operation: Turn on the power supply, turn on the switch, wait for the display screen to reset to zero, and press the touch button to increase or decrease according to the required Rotation speed.
Notice
* FS-1100T Disperser is a series motor, and the brush will generate sparks when rotating, so it is not suitable for use in explosion-proof workshops.
* Rotation speed greater than 4000rpm should not open the machine operation.
* When the motor brush abrasion to less than 10mm, should be replaced in time.
The device does not have a timing function.
The equipment has no explosion-proof function.
