Overview
The HUXI HR-500/6G High Shear Dispersion Mulser is an efficient device that distributes immiscible phases into continuous phases quickly and uniformly. Through the high circumferential velocity and high-frequency mechanical effects generated by the high-speed swirl/spin of the rotor, the material is subjected to a combination of mechanical and hydraulic shearing, centrifugal extrusion, liquid layer friction, impact tearing and turbulence in the narrow gap of the stator and rotor, so as to achieve instant uniform and fine dispersion emulsification, and finally obtain stable high-quality products.
Features
1. Efficient and fast uniform emulsification of immiscible phases
2. Rotor high speed swirling/spinning produces high circumferential speed and high frequency mechanical effects
3. Materials are subjected to a variety of comprehensive forces in narrow gaps
4. Standard Processing capacity range is 0.2-10 ml
5. Speed range 8000-28000rpm, Power 500W/320W
6. The working head material is SS316L, with high temperature resistance up to 120 ° C
Principle
High shear dispersion Mulser produces high circumferential velocity and high-frequency mechanical effects through the high-speed swirl/spin of the rotor, so that the material is subjected to strong mechanical and hydraulic shear, centrifugal extrusion, liquid layer friction, impact tearing and turbulence in the narrow gap of the stator and rotor. Under the combined action of the corresponding process and additives, the insoluble solid phase, liquid phase and gas phase are uniformly dispersed and emulsified instantaneously, and through high-frequency cycles, stable and high-quality products are finally obtained.
Applications
Dispersion, emulsification, mixing
Standards
Power standard: 220V/50/60HZ
Steps
1. Select the appropriate gear according to the processing needs (A-G file corresponds to different Rotation speeds)
2. Start the device and monitor Rotation speed through scale display
3. Place the material in the processing area for decentralized emulsification
4. Turn off the device after finishing processing
Notice
• Maximum processing viscosity does not exceed 100cp
• Operating temperature must not exceed 120 ℃
• Make sure the power supply meets the 220V/50/60HZ standard before use
• Note that all parts of the equipment are firmly installed, such as rubber pads, screws, cutter heads, etc
• Rotation speed according to material characteristics
