Overview
The HUXI HR-500/20G High Shear Dispersion Mulser is an efficient device that distributes immiscible phases into continuous phases quickly and uniformly. Through the high circumferential velocity and high-frequency mechanical effects generated by the high-speed swirl/spin of the rotor, the material is subjected to a combination of strong mechanical and hydraulic shearing, centrifugal extrusion, liquid layer friction, impact tearing and turbulence in the narrow gap of the stator and rotor, achieving instant uniform and fine dispersion emulsification, and finally obtaining stable high-quality products.
Features
1. Efficient and fast dispersion emulsification, Processing capacity range is 50-1500ml
2. High Speed range 8000-28000rpm, providing strong kinetic energy
3. The maximum linear speed of the rotor reaches 20m/s to ensure full shearing
4. Maximum processing viscosity 3000cp, suitable for high viscosity materials
5. Working head material is SS316L, corrosion resistant and durable
6. Rotation speed displayed on scale, intuitive and convenient operation
7. Support high temperature operation, the maximum temperature is 120 ° C
Principle
High shear dispersion Mulser produces high circumferential velocity and high-frequency mechanical effects through the high-speed swirl/spin of the rotor, so that the material is subjected to strong mechanical and hydraulic shear, centrifugal extrusion, liquid layer friction, impact tearing and turbulence in the narrow gap of the stator and rotor. With the cooperation of corresponding processes and additives, the insoluble solid phase, liquid phase and gas phase are uniformly dispersed and emulsified in an instant, and the high-frequency cycle is repeated, and finally a stable product is formed.
Steps
1. Choose the appropriate gear according to the processing material (A-G file corresponds to different Rotation speeds)
2. Assemble the equipment completely to ensure that the cutter head, motor connector and other components are firm
3. Add the material to the container, note that the Processing capacity is in the range of 50-1500ml
4. Turn on the power and adjust to the required Rotation speed through the scale display
5. Run equipment for decentralized emulsification
6. Turn off the power after completion and clean the equipment
Notice
• Ensure that all parts of the equipment such as cutter head and motor connector are firmly installed
• Processing capacity must not exceed 1500ml to avoid overload operation
• Material viscosity should not exceed 3000cp to prevent equipment damage
• Operating temperature must not exceed 120 ° C to prevent overheating
• Clean in time after use and keep the equipment hygienic
• The power supply needs to match 220V/50-60HZ to ensure safe power supply
