Overview
The HUXI HR-500/25DG High Shear Dispersion Mulser is an efficient device that distributes immiscible phases into continuous phases quickly and uniformly. Through the high circumferential velocity and high-frequency mechanical effects generated by the high-speed swirl/spin of the rotor, the material is subjected to a combination of strong mechanical and hydraulic shearing, centrifugal extrusion, liquid layer friction, impact tearing and turbulence in the narrow gap of the stator and rotor, so as to achieve instant uniform and fine dispersion emulsification, and finally obtain stable and high-quality products.
Features
1. Efficient and fast uniform emulsification of immiscible phases
2. Rotor high speed swirl/spin provides high circumferential speed and high frequency mechanical effects
3. Materials are subjected to a variety of comprehensive forces in narrow gaps
4. Can handle solid, liquid and gas phase materials
5. The working head material is SS316L, graphite ceramic, FKM, with high temperature resistance up to 180 ° C
6. Speed range up to 8000-28000rpm
7. Standard Processing capacity covers 100-5000ml, suitable for different scale needs
Principle
High shear dispersion Mulser produces high circumferential velocity and high-frequency mechanical effects through the high-speed swirl/spin of the rotor, so that the material is subjected to strong mechanical and hydraulic shear, centrifugal extrusion, liquid layer friction, impact tearing and turbulence in the narrow gap of the stator and rotor. Under the combined action of the corresponding mature process and appropriate amount of additives, the insoluble solid phase, liquid phase and gas phase are uniformly dispersed and emulsified instantaneously and finely. After high-frequency cycle, the final product is stable and high-quality.
Applications
Dispersion, emulsification, mixing, homogenization
Steps
1. Select the appropriate type of equipment according to the Processing capacity
2. Connect the power supply to ensure that the voltage is 220V/50/60HZ
3. Adjust Rotation speed gear through scale display (A-G file corresponds to 8000-28000rpm)
4. Start the device for decentralized emulsification
5. Monitor the processing process to ensure uniform materials
Notice
* Power supply voltage meets 220V/50/60HZ requirements
* Processing capacity is selected according to material viscosity, the maximum processing viscosity does not exceed 5000cp
* Operating temperature must not exceed 180 ℃
* Pay attention to safety during operation and avoid contact with high-speed swirling/spinning parts
Regularly check whether the structural components of the equipment such as cutter heads, motor connectors, etc. are in good condition
