Overview
The HUXI HR-500/25DF High Shear Dispersion Mulser is an efficient device that distributes immiscible phases into continuous phases quickly and uniformly. It generates strong kinetic energy through high-speed swirl/spin, exposing materials to multiple forces in narrow gaps, achieving fine dispersion emulsification, and ultimately achieving stable and high-quality products.
Features
1. Efficient and fast uniform dispersion emulsification; 2. High-speed swirl/spin of the rotor produces high circumferential speed and high-frequency mechanical effects; 3. The material is subjected to a variety of comprehensive effects in the narrow gap between the stator and the rotor; 4. Suitable for mutually insoluble solid phase, liquid phase, gas phase; 5. Stable products are obtained through high-frequency cycling; 6. The working head material is SS316L, graphite ceramic, FKM; 7. The temperature can reach 180 ° C.
Principle
The high shear dispersion Mulser produces high circumferential velocity and high frequency mechanical effects through the high-speed swirl/spin of the rotor, so that the material is subjected to mechanical and hydraulic shear, centrifugal extrusion, liquid layer friction, impact tearing and turbulence in the narrow gap of the stator and rotor. Under the combined action of mature technology and additives, the immiscible phase is uniformly and finely dispersed in an instant, and the stable product is obtained through high-frequency cycle.
Applications
Solid phase, liquid phase, gas phase dispersion emulsification
Steps
1. Select Processing capacity, viscosity, linear speed, stator parameters according to the model; 2. Refer to the Rotation speed table to set the gear Rotation speed; 3. Connect the structural parts of the equipment such as cutter head, motor, etc.; 4. Start the equipment for decentralized emulsification processing.
Notice
* Ensure that the phases are incompatible with each other under normal circumstances; * Use an appropriate amount of additives with the process; * Note that the Speed range is 8000-28000rpm; * Processing capacity is in the range of 100-5000ml; * The maximum processing viscosity does not exceed 5000cp; * The working head material needs to be compatible; * The temperature does not exceed 180 ° C.
