Overview
The HUXI HR-500/25JX High Shear Dispersion Mulser is an efficient device that quickly and uniformly distributes one or more immiscible phases into another continuous phase. It uses high linear velocities and mechanical effects generated by high-speed swirl/spin to subject materials to a combination of shearing, extrusion, and friction in narrow gaps, achieving instantaneous fine dispersion emulsification and ultimately obtaining stable and high-quality products.
Features
1. Processing capacity range is wide, standard Processing capacity is 100-6000ml
2. High Speed range, up to 8000-28000rpm
3. High rotor line speed, maximum 35m/s
4. Suitable for high viscosity materials, with a maximum processing viscosity of 8000cp
5. High temperature design, Operating temperature up to 120 ℃
6. High-quality material, working head with SS316L and PTFE
7. Multi-gear Rotation speed adjustment for precise control
Principle
High shear dispersion Mulser produces high circumferential velocity and high-frequency mechanical effects through high-speed swirl/spin of the rotor, so that the material is subjected to strong mechanical and hydraulic shear, centrifugal extrusion, liquid layer friction, impact tear and turbulence in the narrow gap between the stator and the rotor. With the cooperation of corresponding processes and additives, the insoluble solid phase, liquid phase and gas phase are uniformly dispersed and emulsified in an instant, and the high-frequency cycle is repeated, and the final stable product is obtained.
Applications
Chemical, pharmaceutical, food, cosmetics, coatings, inks, nanomaterials, biotechnology
Steps
1. Select the appropriate model and equipment settings according to Processing capacity
2. Connect the power supply and ensure that the voltage is 220V/50-60Hz.
3. Adjust Rotation speed gear through scale display (A-G file corresponds to 8000-28000rpm)
4. Start the device for decentralized emulsification
5. Monitor the processing process to ensure uniform dispersion of materials
6. Turn off the power after processing and clean the equipment
Notice
• Check whether the Power supply voltage meets the 220V requirement before use
• Ensure that the material viscosity does not exceed the maximum handling limit of 8000cp
• Operating temperature should not exceed the limit of 120 ° C
• Regularly check the abrasion of the cutter head and working head
• Keep equipment clean to prevent cross-contamination
• Pay attention to safety during operation and avoid contact with high-speed swirling/spinning parts
