Overview
The HUXI HR-500/25JQ High Shear Dispersion Mulser is an efficient device that distributes immiscible phases into continuous phases quickly and uniformly. Through the high linear speed and mechanical effect generated by high-speed swirl/spin, the material is subjected to a combination of shearing, extrusion, friction, and impact in narrow gaps, achieving instant fine dispersion emulsification, and finally obtaining a stable and high-quality product.
Features
1. Efficient and fast uniform emulsification of immiscible phases
2. Rotor high speed swirling/spinning produces high circumferential speed and high frequency mechanical effects
3. The material is subjected to multiple comprehensive effects in the narrow gap between the stator and rotor
4. Suitable for instantaneous emulsification of solid phase, liquid phase and gas phase under the action of process and additives
5. High Frequency Cycle Ensure Product Stability
Principle
High shear dispersion Mulser produces high circumferential velocity and high-frequency mechanical effects through high-speed swirl/spin of the rotor, so that the material is subjected to mechanical and hydraulic shear, centrifugal extrusion, liquid layer friction, impact tearing and turbulence in the narrow gap of the stator and rotor. Under the combined action of corresponding processes and additives, the insoluble solid phase, liquid phase and gas phase are uniformly dispersed and emulsified instantaneously, and stable products are obtained through high-frequency cycling.
Applications
Solid phase, liquid phase, gas phase dispersion emulsification
Steps
1. Processing capacity, viscosity and linear velocity parameters are selected according to the model
2. Refer to Rotation speed table to adjust the gear (A-G gear corresponds to 8000-28000rpm)
3. Connect the power supply (220V/50/60HZ)
4. Start the device for decentralized emulsification
Notice
• The working head material is SS316L PTFE, and the temperature does not exceed 120 ° C
• Processing capacity range is 100~ 6000ml
• Maximum processing viscosity is 8000cp
• Speed range 8000-28000rpm, need to adjust according to scale display
• Input Power 500W, Output Power 320W
