Overview
The HUXI HR-500/25T5 High Shear Dispersion Mulser is an efficient device that distributes immiscible phases into continuous phases quickly and uniformly. It generates high shear force through high-speed swirl/spin, so that the material is subjected to a combination of mechanical and hydraulic shearing, centrifugal extrusion, liquid layer friction, impact tear and turbulence in the stator-rotor gap, achieving instant uniform and fine dispersion emulsification, and finally obtaining a stable and high-quality product.
Features
1. Efficient and fast uniform emulsification of immiscible phases
2. Rotor high speed swirling/spinning produces high circumferential speed and high frequency mechanical effects
3. Materials are subjected to a variety of comprehensive forces in narrow gaps
4. Stable products are obtained through high-frequency cycles
5. Speed range up to 8000-28000rpm
6. Processing capacity range is wide, the standard is 50-5000ml
7. The working head is made of SS316L PTFE, with high temperature resistance up to 120 ° C
Principle
High shear dispersion Mulser produces high circumferential velocity and high-frequency mechanical effects through the high-speed swirl/spin of the rotor, so that the material is subjected to strong mechanical and hydraulic shear, centrifugal extrusion, liquid layer friction, impact tearing and turbulence in the narrow gap of the stator and rotor. Under the combined action of corresponding processes and additives, the insoluble solid phase, liquid phase and gas phase are uniformly dispersed and emulsified instantaneously, and the stable product is finally obtained through high-frequency cycle.
Applications
Dispersion, emulsification
Steps
1. Select the appropriate Processing capacity according to the model
2. Rotation speed setting (A-G corresponds to 8000-28000rpm)
3. Start the device for decentralized emulsification
4. Monitor the processing process until it is completed
Notice
* Ensure that the material viscosity does not exceed the maximum processing viscosity of 5000cp
* Operating temperature must not exceed 120 ℃
Check whether the structural components of the equipment are in good condition before use
* Speed range 8000-28000rpm
* Note that the power supply specification is 220V/50/60HZ
