Overview
HUXI HR-500D/25DG High Shear Dispersion Mulser is an efficient device that can quickly and uniformly distribute incompatible phases into continuous phases. Through the high circumferential velocity and high-frequency mechanical effects generated by the high-speed swirl/spin of the rotor, the material is subjected to strong shear, centrifugal extrusion, liquid layer friction, impact tear and turbulence in the narrow gap of the stator and rotor, so as to achieve instant uniform and fine dispersion emulsification, and finally obtain stable high-quality products.
Features
1. Efficient and fast uniform dispersion emulsification; 2. High-speed swirling/spinning of the rotor produces high circumferential speed; 3. High-frequency mechanical effects bring strong kinetic energy; 4. Materials are subjected to a variety of comprehensive effects in narrow gaps; 5. Suitable for mutually insoluble solid phase, liquid phase, gas phase; 6. Stable products are obtained through high-frequency cycling; 7. Digital display Rotation speed; 8. Working head material is SS316L, graphite ceramic, FKM; 9. High temperature resistance up to 180 ° C.
Principle
High shear dispersion Mulser produces high circumferential velocity and high-frequency mechanical effects through high-speed swirl/spin of the rotor, so that the material is subjected to mechanical and hydraulic shearing, centrifugal extrusion, liquid layer friction, impact tearing and turbulence in the narrow gap of the stator and rotor. Under the combined action of mature technology and appropriate additives, the immiscible phase of emulsification is uniformly and finely dispersed in an instant, and the stable product is finally obtained through high-frequency cycle.
Applications
Suitable for solid phase, liquid phase, gas phase dispersion emulsification treatment
Steps
1. Connect the power supply; 2. Set the required Rotation speed gear; 3. Start the device for decentralized emulsification processing; 4. Monitor the digital display Rotation speed; 5. Turn off the device after completing the processing.
Notice
* Ensure that the power supply is 220V/50/60HZ; * Processing capacity range is 100~ 5000ml, do not exceed the limit; * Maximum processing viscosity is 5000cp; * Operating temperature does not exceed 180 ° C; * Check the structural integrity of the equipment before use; * Avoid operating in a humid environment; * Regular maintenance of the working head material.
