Overview
The TUOWIN TW5501 is a silent oil-free air Compressor with a Power of 550W, an exhaust capacity of 30L/min, and an exhaust pressure of 0.8MPa. The equipment adopts a silent design with a noise value of about 55 +/- 3dB (A), which is suitable for occasions that require a quiet working environment. Its core components are oil-free to ensure that the output compressed air is clean.
Features
1. Equipped with a safety valve, it has sensitive detection and constant overpressure unloading function to ensure safety, reliability and stability.
2. Adopt "Lifu" brand pressure switch, which can accurately adjust the pressure value range to meet high-frequency continuous action to ensure accuracy and Stability.
3. Equipped with a pressure-regulated gas-water separator, including an automatic gas-water separation device, which can effectively filtrate water and impurities in the compressed air. The joints and pressure gauges are made of stainless steel.
4. The gas storage tank adopts "Baosteel" rolled steel plate, double-decked painting process inside and outside, which is not easy to rusting.
5. Using stainless steel capacitors, using imported pressure film and international professional winding technology, the service life can reach more than 100,000 times, the shell is explosion-proof and durable, with multiple interfaces.
6. Equipped with a new type of overload protector with double spring structure, Sensitivity is high, which can play a good role in protecting against voltage instability and other faults.
Principle
The silent oil-free air Compressor reciprocates through a motor-driven piston to suck in air and compress it into the air storage tank. During the compression process, oil pollution is avoided due to the oil-free lubrication design, ensuring the cleanliness of the output air. The pressure switch controls the start and stop of the equipment according to the preset pressure value, and the air-water separator is responsible for filtrating the moisture and impurities in the compressed air. Safety valves and overload protectors provide Safety protection in the event of overpressure or abnormal system.
Applications
Laboratory, Medical Equipment, Food Encasement, Precision Instruments, Pneumatic Tools, Lame plating, Small Production Line
Steps
1. Check the Appearance of the equipment and whether the connecting pipeline is in good condition.
2. Place the equipment in a stable and well-ventilated position.
3. Connect the 220V/50HZ power supply.
4. Set the output pressure through the pressure regulator as required.
5. Open the outlet valve and start the equipment.
6. The equipment will automatically shut down after running to the set pressure, and will start again after the pressure drops.
7. After use, turn off the power supply of the equipment and empty the compressed air and condensate in the air storage tank.
Notice
• Please ensure that the equipment is well grounded and use a power supply that meets the requirements.
When the equipment is running, do not touch high-temperature components (e.g. cylinders, exhaust pipes).
• Regularly check and discharge the condensate in the gas storage tank and gas-water separator.
• Do not use it under conditions exceeding the rated pressure (0.8MPa).
Equipment should be placed in an environment away from flammable and explosive materials.
• Non-professional personnel should not disassemble or modify the safety devices of the equipment (e.g. safety valves, pressure switches).
• When not in use for a long time, please disconnect the power supply and keep the equipment drying clean.
