Overview
The TUOWIN TW5501S is a silent oil-free air Compressor with 550W Power, 30L/min displacement and 0.8MPa rated exhaust pressure. The equipment is designed to be silent, with operating noise as low as 48 +/- 3dB (A) and equipped with a 25L gas tank. Net weight 57KG, the whole machine is powered by 220V/50HZ power supply.
Features
1. Equipped with a safety valve, it has sensitive detection and constant overpressure unloading function to ensure safety, reliability and stability.
2. Adopt "Lifu" brand pressure switch, which can accurately adjust the pressure value range to meet the high-frequency continuous action of the equipment to ensure accuracy and Stability.
3. Adopt a pressure-regulated gas-water separator, which can adjust the stable air pressure according to requirements, and has an automatic gas-water separation device to effectively filtrate the moisture and impurities in the compressed air.
4. The gas storage tank is made of "Baosteel" rolled steel plate, and the inner and outer double-decked painting process is not easy to rusting.
5. Using stainless steel capacitors, using imported pressure film and international professional winding technology, the service life can reach more than 100,000 times, the shell is explosion-proof and durable, with multiple interfaces.
6. Equipped with a new type of overload protector with double spring structure, Sensitivity is high, which can effectively protect the host from voltage instability and other faults.
Principle
This silent oil-free air Compressor uses a motor to drive the piston to reciprocate, sucking air and compressing it into the air storage tank. During the compression process, the air-water separator will filtrate the moisture and impurities in the air. The pressure switch controls the start-stop and load status of the equipment according to the preset value. The safety valve automatically unloads when the system overpresses. The overload protector cuts off the power supply to protect the host in abnormal circumstances. Finally, the drying clean compressed air is output from the air storage tank for use.
Applications
Laboratories, Medical Equipment, Food Encasement, Pneumatic Tools, lame plating equipment, Electronic Manufacturing, Instruments, Small Production Lines
Steps
1. Check the Appearance of the equipment and whether the connecting pipeline is in good condition.
2. Place the equipment in a stable and well-ventilated position.
3. Connect the 220V/50HZ power supply.
4. Set the output air pressure through the pressure regulating valve as required.
5. Turn on the power switch and the device starts running.
6. Observe the pressure gauge. After the pressure of the gas tank reaches the set value, the equipment will automatically shut down or enter the no-load state.
7. Connect the gas equipment and start using compressed air.
8. After use, turn off the gas equipment, then turn off the power switch of the air Compressor, and empty the residual gas and condensate in the gas storage tank.
Notice
• Please ensure that the equipment is well grounded and use a power supply that meets the specifications.
Equipment should be placed in a ventilated, drying, flammable and explosive-free environment.
• Regularly check and drain the condensate in the gas storage tank and gas-water separator.
Do not use the device under conditions exceeding the rated pressure (0.8MPa).
• Do not touch high-temperature components such as motors and cylinders during operation.
• Non-professionals should not remove or adjust safety devices such as safety valves and pressure switches.
When the equipment is not in use for a long time, the power supply should be cut off and the internal gas should be drained.
Before moving or maintaining equipment, be sure to cut off the power supply and ensure that there is no pressure in the system.
